How to make ‘ autumn leaf ‘ earrings
Earrings made with their own hands, in the form of a wedge of yellow leaves, it is very actual decoration for this time of year.
To work required:
- colored polymer clay;
- Acrylic paint is green;
- pigment green color;
- gloss lacquer for polymer clay;
- 2 ringlet of jewelery gold color;
- pair fastener gold.
1 . Draw a maple leaf desired size and cut it out with scissors on white paper. Draw a template on the location of the veins. Mash yellow polymer clay and roll into the reservoir thickness of about 2mm. Put on top of the clay cut paper maple leaf, a bit of his press down until it lightly stuck to the clay. The tip of the blade or knife, cut a sheet of clay on a template. Then carefully remove the clay from the paper template, and it will cut another piece of polymer clay.
2 . The back of the leg or selling a toothpick to leaf veins. Turn over the leaves and do the same veins on the back side. At the base of the leaves make a through hole with a toothpick. Lightly Give the central part of the leaf green hue by colored pigment tint veins. Then repeat this with the reverse side of the leaves. Now bake them in the oven.
3 . After roasting the leaves can be made brighter largest veins. To do this, touch up their green acrylic paint, using a very fine brush. When the paint is dry, put a sheet on a toothpick and cover it with a glossy varnish polymer clay on both sides. Put dry. After half an hour leaves cover another layer of lacquer.
4 . Once dry, remove the lacquer leaves with toothpicks. Attach to a hole in a piece of golden jewelery ring, put on the ring fastener and clamp it with pliers. In this way shvenzy attach to the second sheet.