How to make garland of balloons
 garland of balloons
We need balloons with a diameter of 20-25 cm (10 or 12 inches)
 garland of balloons
Inflate balloons.
 garland of balloons
It is necessary to calibrate the balls at the same size. To do this, we need to make the calibrator with the required dimensions garlands (we homemade particleboard shny calibrator defined sizes 5, 10, 15, 20, 25 cm) Here is an example of manufacturing a garland of 25 cm. The calibrator can successfully replace any capacity (bucket, pot diameter required)
 garland of balloons
Balls must be strictly calibrated by size. It is best to do the calibration on the long side of the ball – from head to tail.
 garland of balloons
Calibrated balls couples relate to each other
 garland of balloons
Better use of quality balls from Italy, Belgium, Colombia, Mexico and Portugal. Balls in China, unfortunately, are at a 50% defective. Quality balloons are made of natural rubber latex, thereby, tires easily stretched.
 garland of balloons
We need to get here are blank. An important point: floors must be clean, without shavings, sand and dirt. This photo shoot took place in extremely unfavorable conditions for the balls. Please take into account the remark about the purity of the surface, because It depends on the length of life of the balls
 garland of balloons
Twist resulting each other, in the end should turn out here is the link – the main components of garlands.
 garland of balloons
Like this.
 garland of balloons
To bind a garland, we need to prepare the rope. Suitable conventional underwear. Lesko and nylon thread used is undesirable because of the high probability of a cut latex pulling.
 garland of balloons
The end of the rope must be tied to anything.
 garland of balloons
Getting links from stringing balls on a rope. At the same time it is necessary to twist the rope between the balls, making one turn around each world.
 garland of balloons
Like this.
 garland of balloons
The next link is imposed against the first staggered. Thus we get a spiral pattern.
 garland of balloons
And since each other. It is important not to break the pattern sequence.
 garland of balloons
Like this.
 garland of balloons
Link by link are arranged in a beautiful garland.
 garland of balloons
Make a garland of the required length. When inflating balloons with a diameter of 20 cm to 1 meter garlands should be 7 to 4 units in the world. When inflating the balloons 25 cm respectively 6 units on 4 ball.
 garland of balloons
Street installation should preferably in calm weather by 2-3 assistants, trying to make mounting with less acute angles surfaces.
 garland of balloons
Remember, garland hung on the outside, live a lot less than the set indoors. During installation, it is desirable to have available spare balls in case of bursting of the ball in the chain.
 garland of balloons
Type of finished and assembled garlands
courtesy: liveinternet