Origami ladybug

Origami ladybug

Origami ladybug

1

Complex in general, anything, but there are a couple of nuances that are never met.
Korovka obtained a length of 12 cm, width 10 cm, height 6 cm.
For the robots will need:
– 166 units of red
– 72 black (for cells)
– 12 black for legs
– 2 white
– 16 half-hearted (8 CASS-black + 8 black and red)
– 7 black small for the bull
– 2 black for small antennae
– 4 small white to eye
That’s scheme.

2 3

The first row of 6 modules: 4 red and 2 black in the middle, the second row 7 modules: 6 red and 1 black, exemplified by the red and white.
Here, the first and second row.

4

And then begins interesting. Maybe I’m a little familiar with the technique of origami and reinvent the wheel, but just have not met me these two-tone modules. If something goes wrong, so Sorry.

5

As I was doing them: one blank for the module was cut in half, and the second, first bent in the middle, and then cut with an allowance for bonding. Total 2 module took 3 blank – two of one color and one another.

6

First tried to glue tape – it did not work accurately – empirically came to glue.

7

Wait to dry out well and swam in the assembly and turn. Only curtail necessary to obtain a symmetrical pattern, one on one side red and the other black, and the other way around.

8

That’s because it looks the third row – 2 module and 6 red (for example, white). This is achieved at the expense of reducing the impact of staggered modules for drawing – in twisted!)

9

There are already 4-th row in place – one black (for example, red) and 6 red (for example, white).

10

Further, according to the scheme in the 5th row goes to the addition of 2 modules on one module and on the extreme. The example shows bright green modules.

11

Then continue to collect under the scheme. And in the 22 series in the middle, diminish. Decrease occurs when 2 pockets module does not include 2 tail as usual, and 3. In the example shown in red. In the course of the assembly need to tighten up a bit so she rounded design in this Statement “shell”, and a number of tails to 22 modules will be located so close to each other that they are right to ask to be more than 2 in a single module.

12

Small units are going at the last moment, after assembling large.
Then glue mustache – 2 small module. And pairs of legs 6 to 2 module. Inside the cow necessarily treat glue. Here is our Ladybug and ready.

Here it is, my beauty, made her a leaf, that was not so lonely.

13

Twist a little bit.

14

15

And here at sunset

16

I decided it made ​​into panels. That’s what happened in the end.

17