For sewing skirts need the following tools and materials:
– natural cotton fabric with bright print of 0.5 m and a width of 1.3 m .;.
– 0.5 m gum .; 2 cm wide.
– Thread in the fabric color;
– A pair of scissors;
Cut-washed cotton, pat iron with steam and only then start cutting. To do this, fold the fabric in half along the common thread and find details skirts, shown on the photo:
– Belt length 54 cm and a width of 5 cm..
– Two trapezoid bases skirt folded height of 13 cm and a width at the waist line of 27 cm and line the bottom of the 32 cm…
– One upper frill 9 cm to 120 cm. .,
– middle and bottom ruffles 9 cm to 130 cm..
Sostrochit side seams based on skirts and middle back seam at the waist and frills. Allowances processed using overlock and smooth nose iron.
The basis of the skirt folded in half side seams in the middle. Adjust the waist line and the bottom so as to obtain a semi-circle, as shown in the photograph.
The bottom of each handle frills roller seam using overlock maximum stretching the fabric. If the edge Neaten another way, the skirt will look very different.
Every frill is gathered using a special foot. In this case the thread tension put on the stitch length and 1 to 5mm increase. Hands regulate the supply during assembly tissue. You can collect the tissue just stitched large stitches and loosening the top thread.
Then pull off ruffles of the bobbin thread to the desired width of fabric and distribute evenly.
The basis of the skirt cut into two equal pieces parallel to the waist.
Assemble the entire skirt. To sew the bottom edge of the frill. Then, between the upper and lower tiers of ruffles and insert a second sostrochit them together. By waistline stitched ruffles and a third zone. The seams on sewing ruffles and belt positioned behind the center of the skirt. Once all stitches on a sewing machine to remove the skin, through which was collected ruffles.
Allowances seams pritachivaniya frills Neaten using overlock. This cuts should not be processed on the belt.
Parting gum length of 42 cm. Overlock stitched to the free edge of the belt. To distribute the gum evenly, it is necessary to pin the pin on the center in front and back and on the sides.
Belt fold in half, hidden inside a seam allowances pritachivaniya frills. Get anchoring line on the front side, departing 3 mm. When sewing line of the belt.
Allowances frills bend up towards the waist and stitched them close to the seam pritachivaniya from the front. Make a straight line will quickly overlock foot for the sewing machine.
To bow to carve out a big piece of folded size of 7 cm. By 13 cm., And a small piece 5 cm. And a length of 7 cm.
Smetana greater detail on the short side and fold it so that the seam was in the middle, as shown in the photo. On the long sides to lay the lines. Then remove the basting and leave open the middle seam. Little detail of collapse and Stitch along the long side.
Details bow twist on the front side. More details defer on the long sides. The seam on the small details centered in the rear. Both parts of the bow to steam.
More details on the thread pull the center. Little sostrochit in the ring and collect the bow.
In the center of the waist skirt to sew the finished bow.