Yellow pink case for smartphone

Yellow pink case for smartphone

Yellow pink case for smartphone

Yellow pink case for smartphone

Choose a thread.

I use ordinary yarn. Choosing yarn look at the structure. Two thread structure should be as identical, but not necessarily. The thickness (diameter) should be 1 – 1.5 mm. You can take a thread thinner cover turned out beautifully, but will spin longer.

Yellow pink case for smartphone

In the photo below, you can see my thread closer. Their different twist.

Yellow pink case for smartphone

For work, you need foam cushions. Preferably in a pillowcase, but not necessarily. Just does not matter the size and thickness. It is important that it was, convenient – not to be put foam on the table, a puncture needle did not get a table or your feet (if you want to spin on the couch).

Yellow pink case for smartphone

One end of the thread to be six times longer than a smartphone. The thread – two finish. So the length of a single thread – 12 lengths smartphone.

Yellow pink case for smartphone

The drawing will cover a two-tone, called checkerboard pattern macrame of the right square knots. At this point, you should talk about your experiences in macrame. In principle, the case could be your first product from the field of macrame. But it would be nice if you have an idea what the Shambala or Fenichka.

(Photo 5) To start cut into 4 strands of pink and yellow 10. Fold strands in half and pinned to the middle of the cushion. We tie a number of square units with a lock on the rightAll units will be right-handed.

Yellow pink case for smartphone

In the photo below, you see the first row of square knots. They are separate elements.

Yellow pink case for smartphone

makes the first fitting and see that my smartphone need another square knot yellow.

Yellow pink case for smartphone

Weave the second row of square knots. The second series starts with the fact that we reject the two extreme strands. Our goal – square knots in a checkerboard pattern. Tying the second row of square knots, correct (delaying) the lugs of the first row of square knots. Ears I call a square knot loops on the first row.

You can see the beginning of the braided fabric.

9

Cut another yarn. In my case, you need two strands of yellow color that would finish one face. Then 4 pink filaments and 12 yellow filaments.

The thread is woven into the pattern.

10

In each subsequent row at the edges of discarding two strands.

As a result, we get a checkerboard on the corner of the square knots.

11

Chips checkerboard from the pillow and fold in half. We tie a square knot missing in the second row. Knot tied on strings, which we have rejected in the second row on both sides.

Now we can see that the smartphone will fit into the case.

12

Yellow pink case for smartphone

In the second part of the class, I almost did not speak, and Scourge Scourge wic …

Nothing to talk about. Our task to expel stocking cover to the required size.

The last row has to be odd, ie, such as the first. Yellow thread separately, pinks separately.

Yellow pink case for smartphone

Not for nothing have two colors cover. I deliberately made so, that would clearly be seen what happens to a particular thread. This technique can be done with any pattern of macrame.

Step 1. Start working with pink nodes.

Select the two strands of warp threads. Crossing them with each other and at the intersection of two rep tying knots.

Yellow pink case for smartphone

I weave Brides left to right, so the right framework will hinge is on the right. Tighten it, thus remove the loop. Naverneo that would understand me better to see this moment on video. Smile

The photo fundamentals are tight.

16

The following sketch this step on my original scheme.

Repeat the same technique and on the other side of the cover.

17

The following sketch this step on my original scheme.

Repeat the same technique and on the other side of the cover.

18 - Copy

Cut the excess thread. The diagram below (Figure 18), the extra strands are marked in orange circle.

The important point. Cutting off the tip of the thread reserve of 2-3 mm. Better more, you can always cut off the excess. The fact that inserting a smart phone in case nodes are tightened (stretched Case) and the tip cut at the edge of the square knot can jump.

In the video I say the phrase with the word “intuitive”. In fact, the practice I can see how much space will take my rep nodes. If you are the first time that weaves likely weaves tight, tight. Vyrezhte for another thread at the central square knot. Ie node will be without warp threads, it (the two warp yarns) is but short.

18

warp threads, which were the basis of a barrel, and remains the basis for a wide (front) of the case. Using the same method, “Brida at the intersection of the basics.”

It is important. Stretch stockings cover the width of your phone and only then start to weave Brides on two bases.

Yellow pink case for smartphone

The photo below, I weave Brides at the intersection of the foundations left. Right hand to adhere to the two warp threads left to tie knots rep.

Important. Do not tighten the knots tightly rep. We have yet to reach warp yarn, which is directed from right to left, in Breeden.

Yellow pink case for smartphone

on which focuses on the warp threads.

All threads are outside, do not fill the bases or cut, all this will do later.

21

Getting to the bottom of the overlap. Started from the sides. Scourge Brides at the intersection of the horizontal principles. In Photo 22, the blue dots are marked thread work; green threads marked the basics.

22

23

24

Propletite several breeds of marginalia to the center bottom. Then turn the cover and propletite from other marginalia ready to meet some more horizontal Brides Brides.

Yellow pink case for smartphone

26

27

Gradually we use all yellow yarn as bases.

The diagram below finished bedplate. It remains to hide, lock and cut the thread ends.

28

With the help of a large long needle (needle gypsy), send the thread ends to the wrong side.

That would be nice, neat, send the thread into the hole next to it.

29

30

31

The gut-wrenching case, straighten the threads.

from the wrong side of purl coils rep sites dressed with the ends. I strongly recommend looking at the video this time.

32

Here is the bedplate from the wrong side. All the threads are embedded and cut the remaining glue.

33

Lightly grease glue, in the event that the ends do not have jumped.

Do not overdo it with glue, otherwise, it will be a rough bedplate.

34

Now you can trim the excess ends.

Remember macrame is a lot of scraps, a lot of waste. Do not get discouraged and look forward to this moment. The thread can be quite expensive and therefore waste is turned into “a mountain of money,” then there is no place that apply.

35

Yellow pink case for smartphone

The Moment of Truth – a gut-wrenching case and look at the result.

37

38

40

41

Yellow pink case for smartphone

It remains to draw the top edge of the cover. I took a white mother of pearl beads, in the tone of your device.

As a thread, use elastic gum.

The elastic band is passed through the eyelets square knots. Ie the needle is passed through the two lugs, then in a bead, and so alternate along the top edge of the cover. The result is a neat edge of the cover.

Yellow pink case for smartphone

The result is a neat edge of the cover.

Yellow pink case for smartphone

45

46

47

Courtesy: stranamasterov.ru