In his master class I want to tell you how to quickly create a beautiful wicker cover for an album, a notebook or laptop.
An example is the cover, which I did for a CD-box.
On A3 paper pasted on both sides of the self-adhesive strips of adhesive tape:
Glued horizontal satin ribbons.
The width can be adjusted independently by the size of your cover.
Chelnochok I cut out of paper.
And then, all of us in a known manner (plain weave) through a series of alternating miss our shuttle through the ribbon.
You can use different colors (optional) Then, on the edges cut off the excess ribbons.
Cut to size dublerin on the adhesive-based and iron-pasted for our wicker surface.
Carefully remove from paper.
Take 2 a square of cardboard 13 * 13 cm, in the middle of a strip of paper combine. The distance between the covers 8 mm.
Apply glue to the cardboard, turn it upside down and stuck on the fabric with the wrong side of the cover:
It must got this blank for future covers. Now cut away the edge of the fabric, leaving allowances 1.5-2.0 cm.
Fold the edges of the cloth and pasted on the cover.
Next, we make out the inner surface of the cover of the paper .Vyrezaem 2 square 12,5 * 12,5cm. Pre-sizing the middle of a (back) our cover.
The edges of the well-sizing. Glue “Crystal” very good sets and leaves no residue.
That turned out such a cute wicker cover. You can follow any responses always count Number of ribbons for your cover size is vazhnodlya to cover the edges looked over.
I hope my master class was useful for you. Always happy to share with you what I can.
