The original collapsible bag of beautiful fabrics.
The bottom of the bag – a small wallet. When the bag is not in use, it can be easily folded up and buttoned in the wallet, so it will not take up much space.
Part I.
Purse. What you need:
1 – One brief zipper.
2 – One long zipper.
3 – Pattern purse on the fabric and backing material.
Foldable bag fabric DIY tutorial
* Note: See Part II and Part III for a complete list of accessories.
Step 1: Transfer the pattern to the fabric and cut, not forgetting about the allowances.
Step 2. Lay the fabric right side (on the right side of the picture is marked as RS) on the backing fabric, kill the pins on the sides. Where dlolzhno be an opening for a small padlock, sew along, as shown in the photos.
Here, in the image, stitched with black thread – it is to appear. Make sure that your lines are the same, and at the end and the beginning.
Step 3. Carefully cut both layers of fabric along the line (pictured purple).
Step 4: Tuck the fabric on the right side inside.
Step 5. Sew the zipper to the hole.
Step 6. Now find the middle and sew.
Step 7. Next, fold the lining on the side where the lock is sewn. It is a small pocket on the purse. And sew (see. In the photo, sewn with black thread for visibility).
Step 8. Sew on the zipper. Put the zipper is perpendicular to our wallet in the middle and make a few stitches.
It turns out – Lightning sharply bent.
Step 9. Now sew the zipper sewn up the middle (marked with a needle). To zipper easier to bend, you need to make small incisions along the entire length.
At the end of the zipper in the same bending as before (step 8).
Step 10. Now take the second part of the lightning and bending it as well (step 8). Sew to the end.
Part II.
Bag. What you need:
. 1 – The main fabric
2 – Backing cloth.
Step 11. Cut two long strips (it will handle bags). Fold along the edges and iron.
Fold in half and then iron it.
Stitch on both sides. Pens ready.
Step 12. Place the handle on the fabric, as shown in the photo.
So that handles the ends sticking up.
In this position, the handle sew.
Step 13: Fold the fabric in half and sew side seam. Be sure to check whether the same pen on the bag.
pre-measure the circumference of the purse, to coincide with the circumference of the resulting bag.
Step 14. Remove the upper edge so that the edge of the pens were on the left side (WS – left side).
Step 15. Now we need to sew the wallet to a bag. Wrenched the bag. Fold the bag and wallet each other right sides. Once again, make sure that handle the same.
It turns out that the lock remains in the right side. You can not see it. So do not sew it by accident.
Make small incisions along the bottom of the bag to the canvas tightly clung purse.
Kill the pins.
Now sew all around, but one of the places where dog remains padlock (only then do not forget to sew on this site).
And the bag looks almost complete.
Step 16. Now turn the bag and gently pull through the slot lock with a dog.
Step 17. Now once again turn the bag inside out and sew the hole. Cut unnecessary tail of padlock.
Now the bag is almost complete. Stitch purse on the outside edge, for a more finished look.
All bag ready, set aside.
Part III. Lining.
1 – lining fabric, about the same as, and took the main fabric.
Step 18. Sew the bag in steps 13 – 15 is much simpler. There is no need to sew any of locks. Just make sure that all seams match.
Part IV. Assembling bags.
Step 19. Turn the bag to the right side. Lining leave the same on the left side.
Now shove inside lining. Make sure that all the joints are aligned.
