Hi everyone… We can simply make Obsolete blouse from old shirt..
It is very simple..Let’s see how to make obsolete blouse from a shirt…
To produce his jacket used two basic things: striped satin blouse simple cut, a silk shirt for the lining. And supporting the fabric of a suitable color (I used a knitted T-shirt). The third color is needed in order to issue the yoke and hem trimmed in engineering “chenille”. netolstym sintepon selected for stitches – â„– 100
Of the tools needed: a seam ripper, small scissors with pointed tips, safety pins, thread two colors, scissors for cutting, foot-conveyor, sewing machine.
In the silence I heard as the alarm sounds annoying buzzer – from the neighbors behind the wall. I looked at my watch – 6:30. But I’m at the table – work in full swing!
It is necessary to carefully unpick parts, rinse them in water to smooth out wrinkles. JAFI in the expanded form. Not ironing (not the format). Tuck reserve.
The bottom of the yoke and I have decided to issue in the chenille technique – an experiment, so to speak. Having defined the width (8-9) cm, note the line, then to lay traps and snares are stitched contrasting thread – is the boundary that defines the site that will then cut between the lines.
Inter layers, follows the shape of the yoke and the edge (rim), on the bottom pinned to the underside.
Behind and below a layer of padding polyester lining. Shear. Scribbling. Stitch width maksimalnaaya (4-5 cm). Here there is a caveat – for him under the photo. Foot-transporter. If it is not – it is better to buy. If the purchase is not possible – choose the minimum pressure of the foot.
The width of the lines on sleeves and edge – less (about 2.7 mm). What for? Then, when cut the tissue between the joints, a step does not hold a mahram – it gets out of control, I mean crawling. I realized it only when cut. I was cut too early. And in some places cut is not necessary – it further. In general, the main embroidery – all operations are carried out in succession, so then it was not painfully hurt for wasted daylight
If the back of the quilt without any problems, then you need to take into account the presence of shelves board. Hiding padding polyester, and a layer of the lining under the board. You can pin or tack to the shelf.
After the stitches shelves reserve is not sewn.
When all the details quilted – time to process sections. Cut strips of desired length of the remaining details of the silk shirt. Collar miraculously enough for the side sections and the yoke went to the processing of the sleeve sections
Strips sew the piping as a first face to face, scribbling on a little less than the width of the foot. Envelope cut and pave the seam “in the groove”.
ironing impossible. But you need to trample sections. So I put on a seam edge of the ironing board and I put the hot iron.
Jacket pockets without the overhead – no double-breasted jacket (but chop on does not imply the presence of pockets). When the question arose about the pockets, any inconsistencies of different nature – how to fit the strip – I realized, but the imposition of pockets I did not like the bottom edge of the wood, and make small pockets on the waist line – nekomilfo … And I, in my school years, deferred a decision challenging puzzles to solve, and went to the solution of which knew. While my physical body is sweating over the shoulder seams, astral requested a response from the universal mind. The answer was sent – is simple to genius: sew pockets instead of a handbag – cuffs on blouses are large enough in the decoration of his jacket, I’m going to use glass beads, which means that the same decor bag beads will overlap, and thus the whole composition is easy to read. I’m sew jacket for walking? Hence, the bag would be appropriate.
Hooray! Minus one day, who would have gone to manufacture pockets.
Sections were processed. Stitches press them apart. I pass to the side … processing on both shelves. The hinges do not interfere, as far from the bottom line.
Before you lay the line on the edge of the bead, for hemming the bottom – the usual hiding seam tack for reliability, but not without the Congress in a ditch …
Now, in fact, we can show that it turned out that the hasty cut fabric (hunting Forest captivity)
Line the edge of the edge of the scribble some thick or double seam.
On the wrong side as follows:
Shoulder seams are treated in analogy, cutting strips of silk residues in size. You also need to stitch the yoke on the back of the shelves and some thick seam. Or double.
Now is the time to return the collar in place. We need to do the fitting and cut a little bit on the back of the neck line and on the shelf, as it is decreased by stitches.
Then can be a little distracted and pochikat cut the fabric on the rim 3 here has everything under control, one can already see where you can cut. It should be noted that the satin crumbles instantly without the use of aids (usually brush).
I play. Now down to business – on the sleeve line. Initially, you need to sew up the incisions.
Then, like all the other parts, quilt, process piping sections. OKATO bomber. To the right sat sleeve, fitting better to make (the highest point will now be shifted with respect to the one that was on the back).
 I lamented that the cuff had time not only to strut, but also cut off the loop. A sleeve something – short steel! Well, the second has the same blouse. I rip off the cuff. A seam in the sleeve a bit ripped, do tack. Bottom slightly priposazhivayu. Sewn cuff (as well as a collar). I tuck it in half and seal the edges of both of a button. That is because it is necessary to train this to happen – the right amount of lovely metal pugovok turned in a jar cherished as much as you need 🙂
I sit back and sew glass beads. In practice it turned out to be less, and I have liberally strewn rim ledge. Well, there are still nearly chopped beads of the same color, it is used to the yoke and back rim.
But the final result – my double-breasted jacket is ready and looks like this:
courtesy: livemaster
