Spools of thread is very romantic nature: and strive to become confused with each other, to dissolve its ends to the environment, to fall to the bottom of society … to clean up the box with them always laborious task – you need to focus each: take coils that domotat blossom thread, neatly in the box, and after a while again a mess! A few days ago I decided to change our long-standing relationships in this way, and put the reel of thread into place.
For the base shelf priodilsya thick piece of Finnish plywood, which long ago polёzhival and missed, left alone after applying his relatives in previous artefacts. Its size and determined the size of the base shelf.
It does not become a bother wooden pins, and went by lighter – and mark the plywood gave the beloved nephew teenage plenty to show his valiant prowess and knock hammer, hammering nails on labels. This he did with great pleasure – the roar of the rushing hammer’m really pressed on the ears, ear plugs but in some way it softened. As an option: you can take the same size screws and tighten them with a drill on the markup. The main thing is that the length of hammer a nail-screws should not exceed the height of the coil – do not want to contemplate their iron ends among the colorful beauties-coils.
Promo and proshkurila of wood. Without it does well in the tree.
You could simply connect the plywood with marginalia – turned to the inverted letter U and the coil would stand perpendicular to the table.But we do not go with light paths, and want to see raznotsvete coils once Kinema in the opinion of the shelf! Therefore, the foundation has decided to fix the angle. For symmetrical markings on both marginalia and cut out a stencil on it with a pencil to mark the position of the ends of the base on marginalia.
Drill drill holes for connection screws of these three parts.
At this stage, it was possible to assemble the shelf, paint, and it’s great to start to perform its function.
But it is important to make it fit into the interior of the room, where she was to go on living. Furniture in the room of white wood and coated with a patina broshirovaniem made antique, so I had to decorate the shelf under the made old. To do this, rubbed paraffin candle ends and surrounding the plane pieces of wood.
With COLOR picked up close to the furniture of white color.
Degreased with acetone, just in case the plywood board as it is long-standing. And to paint everything with acrylic paint, then sanded after drying, grinding bar with very fine sandpaper.
To paint once more.
I start to peel the ends of the sandpaper pieces and realized that a little heated. We had to be careful with paraffin to smear the ends to fray then looked more delicately.
It was necessary to correct the situation – clean off the wax and a little more time to paint these places. Get more accurately.
Sobral shelf using screwdriver, putty putty places fastening screws.
Reinstall your bar, painted attachment points. Here it is, our final result:
The interior shelf is quite fit, all threads in sight. If thread two to three times more, the side panels will let up and it can be attached to another 2 or 3 floors. Shelves that can be out of sight as I have, and on the shelf in the closet, for example, or in an alcove shelving.
Adventure shelves for my thread did not end there as she prepared for a more interesting fate. I will tell her continued existence in front of you – it soon will meet with big shelf and will be included in it, as a functional unit. Most of the regiment, which I conceived for the storage of tools and materials needlewoman it for themselves, too, very soon he will get a start in life. I promise to share with you the stages of her birth: from design to execution.
My silent helpers:
Thank you all for your attention. I will be very glad if the master of the Fair will share their ideas for the storage of products for creativity and they complement my big project about which wrote above.