How to knitted Warmer for teapot

How to knitted Warmer for teapot
 knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot
Fairy houses for wizards, dwarfs and fairies, crocheted and wonderful Grelochka for teapot
 knitted Warmer for teapot
the author of the master class   Anya
Further, the author word
I think you will agree with me that we are all children at heart a little. I’ve been very fond of fairy tales. I like to watch them, read, and … tinkering. But since I am also practical enough people (or at least, trying to be so), I like to combine a story and a life. Maybe you want to create a piece of quite practical tale, linking water bottle on the kettle “Fairy House”. This Grelochka retain heat tea, cheer up, will be a real decoration of your kitchen. And of course it is a perfect gift to relatives and friends.
The complexity of the work I have defined as the average.Kettles in all different shapes and sizes. During the work, you have to empirically determine the amount of increases and rows.
Another difficulty lies in the fact that in the warmer a lot of small details that make the best of fine yarn. Therefore, in order to link all this beauty and sew, it requires a lot of time and patience.
But these details will make your house unique.
I got here this hotty!
 knitted Warmer for teapot
  • yarn of different colors and thickness;
  • black yarn for windows;
  • brown yarn to the door;
  • thin yarn (cotton is best suited – “Iris”, “Daisy», «coco», «rose») for flowers and leaves;
  • beads, beads, sequins, and the like for finishing products;
  • wire and two beads for eyes snails;
  • filler for the snail body;
More about the yarn in the text.
  • glue “Moment crystal” or other universal transparent glue;
  • monofilament or thin filament yarn by color (it is convenient to use the floss in different colors).
  • acrylic paints;
  • sharmiki (metal pendants in the form of a padlock, key, kettle).
  • crochet hooks;
  • sewing needle;
  • needle with a large eye (so-called “gypsy”);
  • Brushes for acrylic paints.
The terms in the text:
  • gain – two columns in one loop; ubavka – provyazyvaem two loops together;
  • amigurumi ring  – finger on the wound yarn (two turns), the resulting ring tied columns without nakida.Remove from the finger and tighten by pulling on the free end of the thread.
Details spirally knit warmers, i.e. without lifting loops (unless indicated more).
For the basics of hot water bottles are best suited acrylic, semi-woolen or wool yarn of medium thickness.
Yarn Alize ecolana (100% wool, 220 m / 100 g), Alizelanagold (wool mixture, 240 m / 100 g), Alize fine (wool mixture, 390 m / 100 g) in the two strands.
Attention! Knit the rear half-loop.
1) Provyazyvaem six bars without nakida in amigurumi ring (first row).
Knit five rows, making a raise on the same across the range, starting from the second row.
Then knit a few rows, making for a gain in a row. The number of rows depends on how high you want to make the top of the roof. The photograph shows how long the crown turned my warmer after I knitted 12 rows (photo A) .
Then knit making two increment in the row, three increments, and so on  (B picture) .
In the course of knitting try on the roof on the kettle.
And now, our roof looked like a wizard’s hat, and completely covers the lid (in my case also bumpers).
 knitted Warmer for teapot
Now knit, making six of increases in each row, forming a field hats (forgot to photograph, but on the following photo shows what happens in the end).
Do not get carried away too much! Fields should not close the spout and stop to take up a pen!
Finish knitting the connecting column. The thread is not cut off.
The roof we get a pattern “rib” because neprovyazannyh face half-loops.
2) Expand the knitting and knit the connecting bars on these neprovyazannyh half-loops, moving to the top of knitting(Picture AB) .
When you have finished knitting, leaving a long “tail” of yarn.
6. Tail tucked into the needle and skip along the edge of the fabric to the crochet 7.
 knitted Warmer for teapot

 knitted Warmer for teapot

Tightens to top bent. Fix the knot on the wrong side of knitting (photo A) .
3) binds the roof edge of a yarn of a different color. I made a harness with two threads, the bars without nakida, yarnAlize softy (100% mikropoliestr) (photo B) .
The roof is ready!
 knitted Warmer for teapot
The basis of the house
1) We put the roof on the kettle and bulavochkami marks the place where the roof is in contact with the kettle
 knitted Warmer for teapot
2) Turn knitting underside of self and provyazyvaem number of connecting bars (chain stitch on the marked circle pins) of the same yarn, knitting a roof (in the photo is marked in gray).
If you, like me, knitted roof in two strands, the chain stitch make one thread.
To the pins do not interfere, they can be removed, after drawing a circle vanishing marker or chalk
10. 3) Connect a different color yarn and knit in the loop gain bars without nakida 11. When dovyazali to the upper base of the spout and handles, knit two sidewalls separately in the warmer if the spout and the handle are at the same or nearly the same level) .On this kettle handle upper base is higher than that of the spout. So I continued knitting rotary series with one blade. For cutout handle left neprovyazannymi three loops 12.
 knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot
Dovyazav to the upper base of the spout, she continued to knit the two halves (sidewall) heaters separately.
Tea at the top of almost straight. Therefore, you can knit without of increases. Increase (one in each row, each of the sidewalls warmers), I began to do when the kettle began to expand.
When knitting, usually try on a heating pad on the kettle and adjust the amount of increases in accordance with the form of the kettle.
When bind the first half, tie a chain of aerial loops, then it will need to connect the two halves of the warmer.
I recommend recording with the knitting of the first half warmers, of increases as you did. Then no problem mate bind symmetrically first.
 knitted Warmer for teapot
4) When the two halves are connected heaters, connect them chains of aerial loops under the spout (photo A) and under the handle (photo B) .
The shape of this pot allows you to knit a heating pad without buttons. But, nevertheless, I made a hole under the handle big enough warmer without problems can be removed and worn.
14. 5) Then again knit in a spiral. Knitting finish, a little before reaching the bottom 15.
 knitted Warmer for teapot  knitted Warmer for teapot
6) Making the strapping magnificent columns.
I was knitting yarn Alize softy.
Lush bars. In the first loop of a number provyazyvaem column without nakida. In the second loop provyazyvaem magnificent column of 3-5 bars with nakida, then knit air loop and a column again without nakida in the third loop of the series. Thus, we knit the entire series. More relief pattern is obtained if between the magnificent columns provyazyvat not without nakida bar, and a connecting bar.
7) holes for spout and handles tied 2-3 rows of columns without nakida and one row of connecting bars (you can tie “rachim step”).
 knitted Warmer for teapot
The basis of the house is ready!
Before going further, it is necessary to moisten the warmer and dry pulevizatora of putting the kettle on
 knitted Warmer for teapot
The windows
1) Windows knit columns without nakida scheme circle. Do gain offset that you do not get a hexagon.
I’m knitting a window “Iris” from the yarn.
Wheel dimensions define themselves based on the size of your house
18. 2) From the colored yarn knit two chains of aerial loops.
 knitted Warmer for teapot
When knitting a second chain, the average loop knit average loop through the first chain to form a sash (photo A) .
3) Attach the cover to the window with a hook (photo B) .
Tails can be fixed knots on the wrong side of the hide or when knitting frame.
4) On the edge of the window knit series of connecting bars(photo B).
5) knit a number of columns without nakida, introducing the hook in the middle of a chain of each of the tabs (photo D). The result was a frame window.
If you are knitting frame from thicker yarn than knitting window itself, then knit without of increases. If the yarn of the same thickness, do six of increases, as in the conventional knitting circle
 knitted Warmer for teapot
Our windows are ready!
 knitted Warmer for teapot
I’m knitting “by eye”. But you can pre-calculate the number of loops that you need for knitting doors
 knitted Warmer for teapot
1) Door knit by the scheme semi-oval. Number of rows in the scheme is conditional – knit as many rows as needed to the desired size of the door.
I was knitting the door of woolen yarn of medium thickness (brand and footage do not know, since it was the remains).It mozho bind and from another yarn, the main thing that it was the right color and not very thick
 knitted Warmer for teapot
The door is ready (photo A).
2) Embroider loop (photo B) . I used the yarn Tulip YarnArt
23. 3) Make the handle to the door. To do this, on the wrong side and fasten thread print it on the front side.
 knitted Warmer for teapot
Take some stick of suitable thickness (for me it is a hook) and make a few stitches When sewing as if the wand to the web.
I made a door with a lock, so every stitch missed the thread through the handle of the castle
 knitted Warmer for teapot
Fasten the thread on the wrong side and then print on the front side.
Pull the rod and wrap the resulting loop. Coils put close to each other without overlaps.
Having finished winding, output thread on the wrong side and fasten
 knitted Warmer for teapot
Making warmers
1) is sewn windows and doors
26. 2) Knit outer frame.
 knitted Warmer for teapot
Paving the chain stitch around the window (on a photo is color coded).
Knit one row of columns without nakida. When knitting, do 4-5 of increases to frame Do not turn to the window.
Make a series of connecting bars (photo B).
27. 3) Similarly, we make out the door. Knit in different columns, forming a canopy. On rounded symmetrically doing 1-2 increments 28. 29. That’s what turns 30.  4) On the other side of the warmer just make out the window 31. 5) Knit mushrooms 32. 33.
 knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot
decorate house
House decorate to your liking. On the Internet a huge number of schemes of all kinds of flowers, twigs, leaves.
Leves knit by the scheme. If the leaves desired length, then increase the length of the initial chain and, accordingly, the number of columns with two nakida.
Beautiful leaves obtained from the sectional yarn dyeing.But you can toned leaves themselves. To do this, moisten the leaves. Breeding to the state of black acrylic paint dark green tint base leaves
 knitted Warmer for teapot
How to tie flowers and twigs:
 knitted Warmer for teapot
Leaves sew along the central vein on the 2/3 length. At the same time the edge of the tip of the leaf and remain free and leaf looks alive.
flowers midway can be embroidered with beads, sew on beads or sequins.
From beads can be berries.
Be creative!
36. 37.
 knitted Warmer for teapot
the snail is connected from the other yarn.
The shell of Alize fine, the body of the yarn  “Children novelty”  (acrylic, 200 m / 50 g).
Snail sew the roof around the perimeter of the body. In addition sew a few stitches to the shell side of the roof to the snail does not overwhelm the side
38. So Warmer looks from different angles 39. 40.
 knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot
Good luck! Warmth and comfort to your home!
 And some wonderful houses of needlework EmCrafts
 knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot  knitted Warmer for teapot
courtesy: gardenmy
Scroll to Top