How to make a ‘cake box’
With the help of a thermo-pistol, glue the side part of the circle, place the joint also glued. The resulting boxes must easily fit into each other.
From the felt, we cut the strip to the size of the side of the crown of the cake adding 1.5 cm along the edges. Glue.
The edges of the felt are notched and glued
We cut out a circle from the felt, equal to the diameter of the upper part and paste it on the cake
Similarly, cut out the parts for the filling of the cake, glue the side, cut the irregularities and glue the inner circle.
To design the bottom part, we took a cotton cloth and a thin layer of sintepon. Cut a rectangle of sintepon along the length equal to the diameter of the circle of the lower part and width to two heights of the cake. Lay the sintepon, so that it completely covers the side.
In the same way, we stack the fabric.
We glue the lateral joint of the fabric, bending one edge. We glue the fabric along the diameter of the circle from the outer and inner sides.
Cut out circles of cardboard and sintepon, a size just below the bottom of the box. We put the sintepon on the cloth flap, top the cardboard and seal it, bending the fabric. The resulting soft circle is glued to the bottom of the box.
From the net, we cut out a long strip about 4 cm wide. We sew a tightening line along the center of the strip and form ruches. Using a thermo-gun, glue our beauty on the edge of the cake.
Beautiful braid and adorn the lateral edge.
Now we begin the most interesting – we prepare bright yummies!