How to make a kitty from bottle

kitty from bottle
 How to make a kitty from bottle
kitty from bottle
We will need:
• Any bottle trunk Kitties (you can take the glass, but I prefer the plastic out of medications if suddenly falls out of a masterpiece to remain the whole bottle);
• Wire tail and neck (preferably take thicker, and which is easy to bend);
• Foam for head;
• Wire lugs (can be thin, e.g., suitable of a champagne);
• Glue “Dragon”;
• PVA glue;
• Gun them bonding;
• Knitting or twine;
• Wine Stopper;
• Shiloh;
• Scissors;
• Pliers;
• For decoration different beads, pendants, chains, ribbons;
• Stationery knife;
• Paper towel;
• Double-sided tape slim.
kitty from bottle
Take the bottle, wash it and dry it, put off until the lid aside. For one Kitty I took the can and pulled out midway (I did it with difficulty).
kitty from bottle
Since the. Canister for wine stopper is small, I cut out of foam. Bottle from under medicines, wine cork is ideal. Before you cut out the foam plug, spread a large newspaper because it will be a lot of garbage. This is the dirtiest part of the job, so I immediately cut from the foam blank for the head.
kitty from bottle kitty from bottle
Cut the required length of the wire for the neck Kitties. The length of the neck chooses at its discretion. I determined in relation to the body. Do all hole in the tube, insert the wire and glue. To better glue foam “Dragon”, although drier longer, but more efficient (from a hot melt hot melt adhesive foam). And to the wine cork – melting.
kitty from bottle
kitty from bottle
Now glue the cork to the bottle.
kitty from bottle
Once the glue is dry, and the plug is securely glued, we will sharpen a knife like a pencil, to give shape to the neck. The hot-melt adhesive dries quickly, but if the glue “Dragon”, is best left to dry for longer. When I honed foam, a little spoiled and had to be re-stick.
kitty from bottlekitty from bottle
Take the cut blank for the head and glue onto the wire with a bottle.
kitty from bottle
In a dark bottle has no smoothness. In order to avoid difficulties in being wrapped, I cut into long strips of paper towel in a box poured PVA glue, took striped completely Macau glue and plastered with a bottle neck, thus lined neck and gave the desired shape. Necessarily need to wait until everything is dry, or when winding the thread will not go to exactly, tubercles.
kitty from bottle
In a dark bottle has no smoothness. In order to avoid difficulties in being wrapped, I cut into long strips of paper towel in a box poured PVA glue, took striped completely Macau glue and plastered with a bottle neck, thus lined neck and gave the desired shape. Necessarily need to wait until everything is dry, or when winding the thread will not go to exactly, tubercles.
kitty from bottle
With the balloon a little easier for a job. She took a thin double-sided tape and pasted parts of it on the bottle, then wrapped around the thread. But the tape glued on a level surface, and where there is a restriction – smeared with glue and wrapped around because the narrowed portion scotch falls tubercles.
kitty from bottle
While our winding dries, make the tail blank and ears. Again, the length of the tail chooses you. I first archwire, and then cut off. I take the wire to the ears, in the bend the arc and cut off. Now wrap the tail and ears thread. Coat with a little wire glue “Dragon” and swathes. I had a piece of this fluffy stuff, so I put on the inside of the wire and turned a fluffy tail. When we start to wrap the ears, be sure to pull back a little from the edges, in order to make it easier to stick their head in the foam. T. to. I have a thin thread, I was in no hurry to cut it after winding, and ears alternately made.
kitty from bottle kitty from bottle kitty from bottle
kitty from bottle
kitty from bottle kitty from bottle
Wrap the ear try on the head and glue. Then wrap the ear is not fully cut thread. Just do all to the second eye. If the winding string, it can be cut and not to leave, because the thread is thick enough and one winding.
 kitty from bottle kitty from bottle kitty from bottle
Determine where our Kitties is the front side and the back at the bottom of the hole with an awl do (advantage of a plastic bottle as opposed to glass). That’s where we attach the tail. Hole can be pierced and winding up, but then it will be difficult to find.
kitty from bottle
At White Kitties only one ear, because instead of the second will be a hat. To make a hat, we need:
• a small thick cardboard (I took corrugated cardboard),
• cap from the bottle (if you remember, at the beginning of the work we put off to the side lid from the bottle),
• nail polish (color to choose to) ,
• to decorate various ribbons tesemochki, flowers and so on. n.

kitty from bottle

Cut a circle of cardboard with a hole, a kind of bagel out, but the hole in the nutria circle should be slightly smaller than our caps. Glue the lid on the cardboard.
Paint the hat with nail varnish in several layers, to avoid gaps. I wanted to hat was black, and therefore painted with black lacquer.
kitty from bottle kitty from bottle
Now decorate the hat to your liking.
kitty from bottle kitty from bottle
Glue the hat to the head.
kitty from bottle
kitty from bottle kitty from bottle kitty from bottle kitty from bottle kitty from bottle kitty from bottle
Kiske glues our eyes, nose, mouth, and antennae. Eyes ready to buy, but you can make yourself. Spout delicate matter. In his works, he pasted different spots: beads, seed coffee Brilliantik. It must be chosen that will approach and will look perfect. Antennae also need to pick up. One Kiske mustache came from a wire, and the other – from a nylon thread. Basically suitable whiskers of wire, but there are exceptions. Mouth, too, made from anything: a wire with red beads, a thin piece of black rubber.
To decorate the Pussycat, it took me a lot of inspiration. Without it, none of the decorations are not suitable. I had a few days to go in thought and strain the imagination. Still, I managed to find the right jewelry and that’s what happened.
kitty from bottle kitty from bottle
My previous job. Kisulya from all sides. Sorry, the photo may be a little blurry.
kitty from bottle kitty from bottle kitty from bottle kitty from bottle
kitty from bottle kitty from bottle kitty from bottle kitty from bottle kitty from bottle kitty from bottle
kitty from bottle kitty from bottle kitty from bottle kitty from bottle
Thank you all for your attention!

kitty from bottle kitty from bottle

kitty from bottle

kitty from bottle

courtesy: stranamasterov