How to make bike for magazines and newspapers:Today I offer you your next job and not only etu.Davno thought to do something like that for magazines and newspapers that are read at the moment and now I have the idea to make a stand here for etogo.Srazu say that the work was done 1 week the results remained very dovolna.Ochen was difficult to find the point of stiffness, but I managed and the design was very solid and reliable, and I am very rada.A as I’ll show you how I did it, and then tell all the secrets for those who want to repeat . Sit down, because the path will be long and ternistym.I way forward ….
1
2
3
Ego.Vid twist the front.
4
Back view.
5
6
7
8
And so begin ….. We need to take a thick solid wire.
9
And make it a 3 or okruzhnosti.Obtyanut teyp- tape or paste over a cloth.
10
We make a great spokes of a wheel.
11
We give them shape.
12
Curl up in the places shown.
13
Okruchivaet harness.
14
We perform the same operation with small wheels.
15
16
Make an arc. (46 cm)
17
We connect it with wire kolesa.Kontsy center Bends.
18
Now we take the 2 wires and make out them to me poloviny.U long wire was not, because I used floristic 30 slozheniy.A if anyone will be able to find a long wire, then immediately have to take a 55 cm.
19
We put in an arc to the bent end of the thrusts and krepim.Posle arc connect 2 wires together 10 cm, and the rest of the Bends for pens.
20
Like this.
21
Since I did not have the length of the wire, then I add a piece of 15 cm.
22
Connecting it with a pen.
23
Several times okruchivaet harness.
24
That’s how it should turn out.
25
26
In the middle of the insert skewers 3 things.
27
Beru Styrofoam balls of different diameters and cut them in half.
28
Secured to the front wheel on both sides, putting them on the skewers and thus put on the glue ..
29
LIKE THIS.
30
Take the skewers (5 pcs.) Or wire.
31
We put in the center of the wheel, resulting axis.
32
Take the wire of 80 cm (2 pcs.) And 20 cm handle, and will zakruglyaem.Eto rear stops for strength.
33
Combine with the center axis, and then process them together, making the end odnoy.Na Bends the same as before.
34
And more is needed is such a zagogulinka 25cm.
35
Now fasten all the parts into one wire.
36
37
While there is ploho.Shatko-rolls. Temporarily pulled an extra wire.
38
39
Now we will make a box.
40
Side lobes.
41
This is done in the same way that the treasury
42
43
44
45
46
For height added more strip width of 3.5 cm.
47
All papered with cloth and decorated.
48
49
50
On the one hand holes identified accession to the bike, in the middle.
51
The point of attachment to the wheels.
52
So fasten to the wheels.
53
In the center.
54
From below.
55
And it will look like a box vnutri.I then I also have not reached a strength to which aspired.
56
More receive a wire 40 cm in length
57
After treatment, I insert it between the wheels, as in the photo.
58
And now it has reached what for so long stremilas.Vse stiffness terms naydeny.Poluchilos very sturdy construction.
59
The box is a bit more embellished and shelled peas.
60
61
62
Now you are ready to paint.
63
64
Paint with black acrylic paint.’
65
We cover zotonom acrylic to seal and decorate strazami.Vnutri velvet.
courtesy: liveinetrnet

 

Shares