How to make clutch from paper roll

clutch from paper roll

Sharing is caring!

How to make clutch from paper roll
clutch from paper roll
clutch from paper roll
We will need. Cardboard thick 1.5 mm 2, cardboard ordinary coated, PVA glue, adhesive tape paint, glue point, line, opener dla cardboard, scissors, cloth.
And of course without assistants anywhere.
clutch from paper roll
This is a blank for the box. Bent widget lay for a long time.
To bend the cardboard it enough to moisten slightly with water and wrap around the base.
Also made of thick cardboard with the help of office knife cut two side cover.
The size is calculated arithmetically.
clutch from paper roll
Bent portion was cut in half (although later had the idea that the cover can be made smaller
(clever idea comes afterward)
bokovinki using the time glued to the ground and the whole thing has strengthened masking tape.
Ideally, inside the box is also necessary to strengthen the tape, but I’m too lazy.
clutch from paper roll
Try on the cover
clutch from paper roll

clutch from paper roll

Stage I plastered the bottom cloth missed, but there I think everything is clear from the photo.
From one end of the fabric does not stick, then cover will be attached.
clutch from paper roll
And this is in addition paste bokovinki.
clutch from paper roll
It is almost obkleennnaya cover for caskets.
clutch from paper roll
This is almost the final prierka cover. At any stage of the product can be a little kartonasha
moisten with water and give the necessary form. But after that necessarily give vysonut, which is about a day.
In general, each pasted items must lie down under the pressure of not less than two hours, or after the product filter can lead.
clutch from paper roll
Remember allowed one base edge of the fabric is not glued boxes?
So it has to be glued to the inside of the lid. On top of it all close strip of fabric.
clutch from paper roll
And the glue that’s so.
clutch from paper roll
To all dried up exactly can help yourself stationery clips.
32
While the whole thing dries loan bokovinki internal and external.
When pomoshchbju compass remove them and cut the size of an ordinary cardboard.
Master Class Modeling: boards. MK Cardboard, Fabric. Photo 17
Cut, pasted cloth and always allowed to dry under pressure for 2 hours.
Then the external side cover can be stuck on the box.
clutch from paper roll
And it is already prepared interior box
clutch from paper roll
So pasted bottom part
clutch from paper roll
And prepared bokovinki.
clutch from paper roll
Well, dries casket.
clutch from paper roll
Well, the finished version. It remains only to make a stand for it.
courtesy: filosofyfree

Sharing is caring!