In this tutorial, I will share with you information on how to make a fashionable dress for the girl .This dress can be timed as a holiday, and to everyday festive campaign in a cafe for example.
For sewing of children’s dress 110 size on a girl of 5 years, we need:
Fabric color thick cotton (holding good form) of 0.70 m and a width of 1.40 m,
Satin white stretch bodice 0.35 m,
Hard red tulle 1.4 m x 1.4 m,
Lightning white length 35 cm,
Cut a paper pattern details of the dress. Indicates the number of each part. This we will pattern dress .
White satin folds into two layers. Spread on prepared tissue backrest parts and before dress . Please note that the fold indicated on the parts before applied to the tissue fold. Details can be arranged, as shown in the photo. Pinned pattern pins.
Mel transfer the outlines of the details on the bodice fabric. The planned allowances. On the sides and bottom parts allowances equal to 2 cm, shoulder and armhole slices – 1.5 cm, and on the neck of allowances equal to 1 cm. Cut back details and forehand with allowances.’
The work will begin with the processing of the neck to the broad inlay. Prepare a dense sheet of paper for inlay patterns.
On a sheet of paper and a pencil to impose outline the contours of the neck and shoulder cuts.
Remove the item before. On a piece of paper draw a pattern inlay patterns forehand. Its width is about 5 cm.
Cut a template from paper ready.
Bakey we cut out of colored fabric. Spread the material in one layer. Pins Pin Up sweep to the fabric.
Pencil or chalk outlines transfer the patterns on the fabric. Add, just in case more allowances on the 1.5 cm slices on the shoulder, on the lower edge we add an allowance of 1 cm.
Cut a template of colored fabric.
Here is the wider inlay for the treatment before the neck.
On Bakey spread curve of thick paper and hot iron press out the lower sections of the top inlay. Thick curve will give us the opportunity, relying on sections smoothly bend allowances inlay.
Bakey priutyuzhivaem in finished form.
On the wrong side of the forehand pins pinned to the neck Bakey face down.
Pritachivaem Bakey neck to prepayment machine stitching. By allowance of the neck to the ground with his curved scissors make notch. So we can turn Bakey and get a smooth seam.
Bakey turns away stitched on the front of the forehand. Pins fix folded Bakey. Priutyuzhivaem her neck.
The face of the hand sew basting stitches to the front inlay. Sew it to the finishing line in front of a 0.1 cm from the edge of the hem. Priutyuzhivaem Bakey in finished form.
Now prepare the paper for cutting out the piping to the back of the neck. On paper, lay out part of the back and a pencil outline the back neck and shoulder cut.
Remove the back piece. On paper, draw the piping.
Cut the piping of the paper. The plot is about the piping pritachivaniya lightning broader than near the top of the shoulder cut. See photos.
Piping to the back of the neck parts we cut out of white satin. Fold it in two layers. Pins pinned facings of paper to fabric. Chalk or pencil thin transfer the contours of the piping. Cut the piping on the planned lines. We outline the shoulder section of the piping and the slice that pritachivaetsya to place lightning pritachivaniya.
According turnery cut cut out of the nonwoven adhesive gasket.
Interlining is glued to the underside of the facings using iron through proutyuzhku.
Excess fabric inlay on the shoulder forehand slices cut off. Go to the sewing of the shoulder sections of the forehand and back dresses.
Before we put the dress back and inside out so that the allowances at the back of the neck were treated with neck forehand 1 cm. See photos.
Shear pins shoulder sections and then grind them to a machine stitching. We are making the beginning and end of lines of tack.
Now shear pins side edges of the forehand and back dresses.
Grind down the side seams stitching machine. Treat the shoulder and side sections overlocking.
Press out the side seams towards the forehand.
The lower sections were prepared piping neck back handle overlock.
Getting pritachivat piping on the back neck. Take the shoulder seam dress.
By the shoulder seams dress pins pinned shoulder sections facings. Then go back to the neck and place a lightning pritachivaniya. Pins and pin up the piping to these slices.
Tack facings hand stitches. Pritachivaem piping machine stitching. The line runs along the shoulder seam (try to get into the already laid a seam), before reaching the end of 1 cm. Then in the corner and turn the product continue to scribble on the back neck, already before reaching the corner of 5 cm. We reserve until bodice.
Go to the skirt. Cut the strips of colored cloth to the cloth skirts. This strip must be the size of 0.28 mx 1.90 m. The length of the skirt, we will be approximately 25-26 cm. If the width of the web is not enough, as in our case, it means to grind down two strips of cloth. As a result, it should have a length of 1.90 m width.
On the panel we outline the pencil marks every 4 cm. Laying inverted pleats 4 cm depth.
Fold by fold located at 8 cm. Look at the photo. Slaughtered every fold pin. According to the folds at the upper edge of the flag paving machine line with a wide stitch to remove the pins, folds are not disintegrated.
Gaugeable measuring tape waist length. It is about 60cm. The length of cloth with folds should be equal to the length of the waist. If the cloth skirts longer, it can be fixed, with his extra length in the last folds back behind the center.
Fold together the cloth skirt with a fitted bodice dress inside out. Shear pins skirt and bodice.
Tack the skirt to the bodice hand-basting stitches. The last fold should not go to the center back cut to 2.5 cm. See photos. Tuck ends 2.5 cm to cut.
Pritachivaem skirt to the bodice of machine stitching. Make a tie at the beginning and at the end of lines.
Sections sewing skirt with bodice processed overlocking. Then process the central slices back and bottom of the skirt. Shear central sections of the back pins to place a lightning stitch (retreat from the waist about 10cm). Grind down the back seam on the back of the machine stitching.
Then stitch the zipper. Then before the end of pritachivaem piping that is not dostrochili through.Slice and pritachivaem piping along the zipper. Line try to lay in place already paved pritachivaniya lightning. To turn away the piping inside out. On the front of the neck should look as shown in the photo.
Priutyuzhivaem neck dresses in finished form through proutyuzhku.
The bottom of the dress folded the 1 cm and otstrachivaem finishing machine stitching.
Go to the bottom of the skirt. We cut out her rigid tulle. Fold a piece of tulle in four layers, like a handkerchief. From the corner of the note of 30 cm and a radius of 30 cm cut the sector. Length of the skirt 40 cm. From the cut mark 40 cm. Cut the sun skirt. On one side down at 15 cm from the upper edge of the skirt make a cut.
At upper edge skirt paving two parallel lines for assembly. Start and finish line should be around the cut.
Make the assembly. To do this simultaneously tightens the bottom two strings. At the same time adhere to the upper thread with your fingers. Evenly distribute the assembly on the skirt waist.
The assembly to collect waist length dresses. They should be equal. Pinned to the waist petticoat dress. The cut of the skirt should be in place to lightning, when it will undo the lower skirt also sold in this place.
Sew the bottom skirt waist stitching machine.
The sleeves are cut out of white fabric. Fold it in two layers. Pins pinned the pattern. Mel transfer the contours of the pattern on the fabric.
Cut two pieces sleeves. PLANNED cuffs centers.
In round sleeves paving two parallel lines for the assembly of 6 cm from the center to both sides.
Fold the sleeve on the side facing into slices. Grind down their machine stitching.
Contractible thread assembly. Evenly distribute the assembly on the sleeves. doused sleeves length must be equal to the length of the armhole dresses. It is governed by an assembly.
Bottom sleeves and folded the handle overlock 1cm. Otstrachivaem finishing machine stitching at 0.2 cm from the edge.
Tack in the sleeve in the armhole dresses. Pre combine center sleeves with shoulder seams.
Sleeves stitch machine stitching.
Make a small bow of colored fabric. Cut the rectangle 10cm x 7cm.
Fold the rectangle along the middle.
We grind it along the machine stitching. To turn out on the front side. Refill cross sections open inside. Sew up their hand stitches. Priutyuzhivaem strip off the shelf.
We outline the bow center pin. A few hand stitches sew bow in the middle.