How to make gift box
I usually do not find a box at home, and now his son bought a new web camera (old Chet stopped working) and this is the box I picked 🙂 and she just went on razmerchik !!
For the inner lining is needed Cardboard – tightly! 1 item in duplicate this length and width of the box plus minus 0,5 cm allowance for pasting into 1cm – bend!
Detail 2 – equals the size of the cover, and 3 in two copies – at 0.5 cm shorter and narrower than the part number 2 !!
From tissue cut out a long strip of equal length and width of the box-Plus allowance on all sides: from the edges and 1 cm from the top and from the bottom by 2cm !!
Short strip for fastener (you can experiment with forms)
and the rectangle is equal to the cover, with margins on all sides about 2 cm!
On top of the lid need paralon was, it was not me and I taped a piece of cloth on an old flannel blouse!
Lining can be made from the same fabric as tight, but I wanted it!
Cut a strip of the Drina, equal to the inner cardboard number 1, which we cut separately – both parts together! with an allowance on all sides by 1.5 cm
and two rectangles that are equal to the part number 3 on the first picture – with an allowance on all sides to 1.5 cm!
Now you need a sewing machine, but you can sew by hand! The outer edge of the fabric sew!
Schivaem wrenching and otstrachivaem in edge buckle! (I did not find matching color thread)
vystrachivaem loop – you can use the buttons, magnets. and daezhe just tape fasteners instead !!
Hehe button then even so I changed 🙂
Now take the embroidery and pre-pasted inside the cover dvuhstornnim tape, stretch the embroidery, the Mesa fold the bottom of the field in the then 2 – incision diagonally !!
And the outer part of the same glue on dvuhstornny scotch!
Now stretch the cross-linked and the inverted tissue postorayus that the seam was in the corner !!
Overturn and seal the bottom of the double-sided tape on !!
In place of the seam in aozle cover a little cut, so easy to wrap the cloth inside the box !!
and on the opposite side of the incision neatly do !! Refill cloth !!
Now pretty hard work, because it will have to do sooo much !!!
Sewn up nicely with the same distance, a thin but very strong thread seat fold !! Carefully tighten the thread !!!
we catch on the fastener Scotch !!
Sew edge lining !!
Merge cardboard to pieces !!
And shrinking the inverted liner, rounded top and bottom, sizing them double-sided tape!
Take part 2 – is the inner part of the cover !! and paste it with a cloth!
Corners neatly cut away …..
… Leaving a small area, which is also put on a piece of adhesive tape and sealed !!!
Inside shove, pasted lining, cardboard !!
Paste 2 part number 3 of the lining fabric and glue extra adhesive tape on the center !!!! Since I have a thin lining, I do not cut corners, if the fabric is dense, it is best to do both on the inside of the cover !!!
One of them put on the bottom of the box !! The other is glued to the bottom, turning the box !!!
Before we sew all the edges have to sew a button (or attach a button) … for this I pricked with an awl box in the right place, and sew a button, putting a piece of cloth, and on the inside, because the cardboard box is easy to thread breaks !!
Now you are ready to suturing of the edges on the inside of the lid as well as the very bottom of the box !!! very long procedure, and may have a beautiful stitches for that matter ….
That’s how it all rebuffed and left to cut the loop !!
Here is the bottom (not quite doshit pictured) !!!
That’s it, a box is ready !!! You can decorate with ribbons !! But I liked and so !!!