How to make house in the style of "Chalet"

How to make house in the style of “Chalet”

Finally we finished with a student work on the house. I hasten to share the result. Maybe not everything turned out as we would like, but we tried. I’ll try to put a small master class, can someone come in handy.

Back view.

On the cardboard of the box draw a size to scale the walls of the house, windows and doors (drawing at the end)
Cut parts stationery knife, cut through windows and doors. Paste them with a thin white cardboard

Thin strips of white cardboard 6 mm width is pasted over the slopes of windows and doors.

On paper, draw a double-sided brown windows and doors in size. Knife cuts through the frame. Stripes pale yellow paper 3 mm with glue for decoration. On the front side of putting a solid cellophane, and on the other side of adhesive tape pasted to a brown frame. Ready window to paste an adhesive tape to the walls of the house.

Merge the wall, forming a house, and glue it to the base – chipboard size 70 x 80 cm.

Clay foundation of rough cardboard strips 3 cm wide and paste printed stone texture.

The structure of the walls of the house. Grease the walls with white glue and sprinkle with semolina.

The external corners of the house paste decorative stone, pre-pasted printed stone on a thin cardboard and cut out the shape.
Decoration of windows. Decorate shuttered windows. To do this, we draw on a thick cardboard box width of 1.5 cm and a length – height windows. In the corners of the rectangle and pushes the needle swing the strip of brown paper to 3 mm wide and smeared with glue, forming a rectangle. Fill it curls twisted quilling technique. For the top and bottom of the windows form the same rectangles only 5 mm wide. Pasted over the windows so “shutters”.

The house has three doors with terraces and staircases. Before their manufacture paste paving house – sticking cardboard strip width of 5 cm and paste the printed paving stones.
We make the columns. Glued stone texture printed on thin cardboard. Hell, cut out and glue the columns of a 2 x 2 x 6.5 cm. Such columns should be 13 pcs. Columns 2 x 2 x 4.5 cm should be 4 pieces.

The front terrace. Cut the rough cardboard rectangle measuring 6 x 38 cm. We share the edge into 5 parts, and cut through from one side of 4 rectangles measuring 1 x 2 cm, at the corners 1 x 1 cm (to insert columns). Paste the rectangle printed wood structure. Glue it to the base and paste it columns, while gluing them to the bottom.

Side terrace. Cut the cardboard rectangle measuring 16 x 14 cm. We share it with the three parties into 2 parts and cuts the average size of the rectangle 1 x 2 cm, two corners 1 x 1 cm (to insert columns). Paste the rectangle printed wood structure. Glue it to the base and paste it columns, while gluing them to the bottom

Rear view terraces.

The rear terrace. Cut the cardboard rectangle measuring 6 x 8 cm. Cut through the two corners of a square measuring 1 x 1 cm (to insert columns). Paste the rectangle printed wood structure. Glue it to the base and paste it columns, while gluing them to the bottom

Stairs. Printed stone structure pasted on a thin cardboard. We draw the ladder with the calculation of step height – 0.5 cm width – 1.5 cm in front of the terrace stairs Width – 7,5 cm., Lateral – 5.5 cm, the back – 5.5 cm (do not forget to add 5 mm on top and bottom of the stairs to paste). Scratched on the lines and bend, forming a ladder. Glue them to the terrace at the top and bottom of the pavers.
With rough cardboard cut out side the foundation for the stairs – a rectangular trapezoid size of 3.5 x 5.5 x 2 x 6 cm paste its stone structure.. Glue the stairs and columns. Bottom ladder sticking a small bar.

Railings. With brown paper curl on thin spokes tube length of 5 cm and 2.5 cm. (Between each column of the length of the railing to be measured), make a rectangle on pins and needles (for the shutters) 4 x 1.5 cm. With glue tubes box, paste it curls, twisted in quilling techniques, glue in a rectangle with strips inside make out droplets and circles twisted in quilling techniques.

With rough cardboard cut out a rectangle measuring 13 x 4 cm. Paste it printed a tree structure. Awl pierces the wall in several places with a joint balcony wall, pierce with toothpicks and glue brushing the edge of the balcony, inhabits them, pressed tightly against the wall. We produce railings on the size of the balcony, glue them.

With rough cardboard cut out a rectangle measuring 14 x 8 cm paste it from the bottom and sides of the printed structure of the tree, and the top -. Shingles. Bend at the top corner of the form of the house. Glue to the wall above the door with the help of toothpicks (like a balcony). With brown glue tubes support and decoration.

The size of features and cut out two pieces of the roof. The bottom side of the roof and circular wooden structure paste printed stripes 5 cm wide. The top of the structure of the printed paste tiles. Glue the roof of the house. The coating on the side terrace and a little raising of brown glue tubes backups that become columns. Also sticking front house under the roof decoration of the tubes.
We make horse: a thin cardboard pasted printed texture tiles, cut a strip width of 4 cm, scratched along the length and bending, glue on the fold of the roof.
For the chimney on a thin cardboard glue printed invoice tiles and traits , cut out and glue the size of the chimneys in section 3 x 1.5 cm on the long side height – 10, 11 and 12 cm.

With rough cardboard cut out the front and sides of the attic. Paste them with a thin cardboard and sprinkled with semolina. Paste the slopes. Decorate window shutters. Merge walls together. Cut the roof. The bottom and sides of a circle is pasted over the printed wood structure. The top of the structure paste tiles. Glue the roof to the walls of the attic and the entire structure is pasted to the middle of the roof.