How to make quilling frame

How to make quilling frame

How to make quilling frame

This work very simple but with a little effort, you get a wonderful gift made ​​by your own hands

Materials: For this work you need: flat 0,3sm blue and yellow colors for the petals of the iris (the color, you can take any of your choice), strips of green shades for leaves and different colors for seredinok. Strips “Fuzzies” width 1cm, 0,7sm, 0.5cm of any color of your choice. A strip of 0.5 cm for green border clearing. (By the way I have strips of office paper). Paper watercolor background, thick cardboard for the stand,  glue, scissors, quilling tool or a toothpick.


“Fuzzies”: from whole strips of 1 cm – 5 pieces, 0,7sm -2 pieces, 0,5 cm -2 pieces,
“Daisies”: from whole strips of 1 cm – 3 pieces, 0,7sm – 4 pieces
you can make a variety of sizes, colors and shapes of your choice and mood. Depending on the dimensions of the strip (width may be 0.5 -0,7- 1- 1.5 cm 3, and an entire length or ½, 1/4) and “Fluffy” will have different sizes. Fringe is produced as follows: the desired length of the strips cut from one side, along the entire length, leaving about 2 mm uncut. We try to make cuts as close as possible to each other, it will give “Fluffy” a more natural look. To speed can be simultaneously cut strips 2-3. Then cut into strips curl up into a tight roll, fix the bottom of a glue and after the glue has dried fluff.
It is possible to connect the (overlaid) fringe two different colors and twist them together, you get pestrenky “pussy.”
If a strip of fringe and paste 0,3sm start to roll with strips 0,3sm, you get a “daisy” and, depending on the lengths of the bars and midway flowers themselves are of different sizes. Middle, get striped, if you connect (apply) strips of different colors. Instead of a simple strip 0,3sm can take the fringe of smaller strips. For example: the main fringe of 1cm strips, middle, and – 0,5 cm. Glued together strips, begin to wind a smaller fringe into a tight roll. In the finished roll straighten the edges and do not touch the middle of a.
These are different pussies – is where carousing fancy.


For the branches it is necessary to twist the 40 petals form “drop” of ½ strips. Sprigs collect, how in the photo. In order to collect the leaf must be green stripes 0.3 cm folded in half and glue. Then you have to make an incision of 3-4 mm (get a “slingshot”). And it insert “drop” – this is the height of the sheet.
Then glue along the strip on the left and right side of the next part “drop.”
We need more and some leaves – a 16 “drops” of the entire strip, 14 – from ½ strips and 6 – of ¼ strips


To glue the petals of an entire strip of blue and half yellow. Twist roll it to dissolve the d.15-16 mm, making the shape of a drop, and we bend it slightly (6 pieces). For the upper petals (6 pieces): twist the whole blue stripes, roll up d.13-14 to dissolve, then squeeze it in the middle, and then release the stifle edge, giving the shape of a semicircle.
To buds of blue strips ½ twist the shape of a drop of (2 pcs) and 2 parts green arrow in the form of strips 0,3sm halves. Blue bud paste it into the green arrow. Arrow: ready “drop” it is necessary to pinch between the thumb and forefinger of his right hand and nail thumb or forefinger of the left hand to press down. Then, without releasing the drop, hold it over the entire length, thereby fixing a new derived form.
Peduncle (3 nesses) of whole green stripes make the shape of a drop, then hold it between your fingers, and on top is pressed down – get the triangle.
Putting flower: to glue lower petals of the flower stalks, and then the top. To stem green bar 0,3sm must be folded in half and glue and glue the ends of the two sides to the peduncle.
All the items are ready, proceed to assembly.


Take a sheet of watercolor paper (I have the size of 21h15), toning background of dry pastels (crayons, pencils) as in the photo, it is necessary with a knife to make chips pastels and grind its background cloth (cotton). Bottom reserve white.


After the background color, using glue, glue border clearing – 0,5 cm strip giving it the desired shape (curved with an awl or skewers. We note the location for photo corners or sticking to it.


Glue the irises. The leaves of irises do as loops of the conventional strips. Please try on, which will host a leaf, cut the desired size, glue, and so on.


Now go to the meadow. Please suggest decomposed leaves and flowers, as it were examples. And then collect on glue. To work was neat, glue the as gently as possible, take your time. To work, you may need tweezers.

8 (1)

Putting it gradually, in parts. And at first glue the leaves and then flowers.


And at first glue the leaves and then flowers.


They collected one part, go to the next.


At the end we inspect the work, adding, where you listiki- “drops”. You’re sticking our frame to the stand of thick cardboard. That photo frame and ready – to get an excellent gift made by your own hands


That photo frame and ready – to get an excellent gift made by your own hands





Scroll to Top