How to make snow White Easter bunny in mixed media
We need to create this rabbit:
fur (I Plush pile with about 13 mm);
eyes 12 mm;
About pin-shaped – 2 pcs. or T-shaped – 1 pc .;
washer under pins;
disc diameter of 20 mm – 2 pcs;
Wool Felting in fur color and slightly dark wool;
Needle Felting (number 36, 38, 40);
Kapron thread for utjazhki;
Rabbit Pattern is given below, but since I was not her first, had to fashion a rabbit out of clay.
Then remove the pattern on tracing paper, tracing paper to transfer on paper and bring to mind.
That’s the pattern. It shows the letters that can be transferred to the fur, so as not to get confused. The arrows indicate the direction of the nap.Paired components must be mirrored.
We transfer the pattern on the skin, according to the direction of the nap. Cut the details, not forgetting the allowance (about 7 mm) at seams.
First sew darts at all the details of the head. All seams are seam perform frequent “back needle
Now it’s time to sew together parts of the head. On the pattern for that bear the letters. First, sew the lateral symmetrical parts (AB segment).Then sew a small chin piece (segments BV and WB).
That’s what happens. Now, turn the top of the head.
Sewn (segments AG and GA) and wrenched through the remaining hole.
Before you sew the head, insert the pin into her scheme. Flush head sutured seam.
With calf parts act in the same way. First sew darts, then sew parts respectively specified letters, leaving an opening for eversion. Having turned out, body is put aside, back to the head.
Strong thread (I monofilament thread) two-ply do utjazhki eyes. Introduce the needle in place tucks on the segments AH HA and the upper parts of the head. Then, insert the needle near the place a 7 mm toward the occiput. Withdraw the needle at the point where the fixture.Tightening and tying.
Getting a haircut rabbit. On the whole front muzzle leave even a short nap, with a smooth transition to long pile behind.
Has cut the cheeks and the lower part and see that manifested the mouth, which also need to pull. For utjazhki introduce needle and thread to point B, then the place where the eye is pulled, then the place of attachment. Similarly we proceed with the other end of the thread.
Swifts pile on. Look, check exactly whether and swifts on. Here is a mordaha obtained.
Eyes I took them transparent and colored dark brown acrylic. In places where the darts on the upper part of the same to the side parts are sewn eyes. We find these points and mark with pins. Check symmetry bulavochek.
Sew in this place glazik. For glazik, towards the top, we are also sheared pile.
Nodules strands of sink marks and by sewing the eyes coat with glue. We cut off with scissors.
The preform body (a point E) to introduce the pin mounting head. We put on the drive pin and washer. Twists rather riving pin pliers.
During the same curved anchoring pin nylon thread in two additions to utjazhki body. Vdevaem the ends of the thread the needle from the bottom and display a calf at the point F, leaving a small distance between the ends of the strands to further sink marks.
Pour granulate. Stuffed with synthetic padding and sewed up a hidden seam.
The final step on the sewn part be utjazhki calf.
The result was a blank, which is simple and we complicate privalennymi details. Go.
Consider two bundles of wool for the ears. Dump a rough approximate shape of a needle’s eye.
Try on, given that the ear has decreased by a third. We are working on the surface of a thin needle, forming curves tab.
Also raspushёnnoy bottom part which will privalivatsya to the head, the eye of all the polished final. Try on fixing bulavochkami.
It is the turn of the front lapochek. We take the same amount of hair on each. Starting form of wool foot with raspushёnnym end for privalivaniya to the calf. Raspushёnny end should be pointing upwards.
On paws are working needle fingers. Try on, securing bulavochkami.
Similarly do its hind legs. Just need more wool and their shape is more elongated. Make a foot at a time, so they do not get different size. Just form the fingers. Top tips for leave fluff privalivaniya to the calf.
Now the tail. Dump a small ball with a protruding portion for raspushёnnoy privalivaniya to the base.
Bulavochkami fasten all matted part to the base and start privalivat thin needle.
Privalivaya paws, you need to make sure that they are flat on the surface.
You’re the smallest, but the most terrible and responsible – spout. Take it for a tiny bundle of fur. Privalivaem and form on the site.
That has become so small tip. To select it, apply a dark brown coat.
Tumble her needle in place, where there are the nostrils and mouth. Toning nose and ears pink and brown pastel.
Bunny is ready! Happy bright holiday!
Thank you for attention!