mosaic tiles of CD-s drives :
The tiles you can make any desired shape, so the discs can be easily cut with scissors.
Enjoying a master class …
You will need a CD-s.
The first thing we do is done to separate the upper layer of metal.
To do this, the tip of the scissors will hook a little bit.
Then, put the CD on
self-adhesive paper and film, transparencies,
metal face down.
And now, we do “epilation”
pull with force, and only once.
There is always some residue,
It is also removed.
Cotton wool soaked in alcohol,
remove the layer of green paint,
it will remain transparent.
After cleaning, put on top of lined boards.
If you do not, the network you will find many templates
for print. With the help of the cutter knife, a ruler, draw a band,
a first horizontal, then vertical.
Now, a good pair of scissors, and a good dose of patience, we will cut.
I took these operations with 3 CD-s.
We continue to do other hard work, painting. Paint on top of a piece and put a piece of clean, make a sandwich from pieces of …
You can use acrylic paint, watercolor, oil on canvas ….
Prepare a tray for oven,
cover with foil and put all the sandwiches, they do not touch each other
I turned on the oven to maximum power,
Total time was 7 minutes, until they became
to bubble, turn off the oven and leave to cool in the oven, then remove.
Now, you just have to use your imagination to use them in your artefacts
YOU CAN DO TILE any arbitrary shape as in the photo below …
EXAMPLES Mosaic of exotic materials