How to create artificial lake garden
This article describes how to create a lake garden with small time as well the dream of every gardener.
Learn how to make it beautiful
Decorative elements
Especially a well-decorated lake in the garden requires some decorative elements that are basic, but require some work.
Steps to Follow:
Delimiting spaces:
To begin, you must study the location and space its lake.
Use some elements to delimit the space, using stakes or a piece of cardboard to verify the environment in his garden.
This step is very important and does not require much work, also advised that you have to choose the format of your lake.
Time to dig:
it’s time to start digging the earth and begin installing your pond in the garden.
remember the depth is advisable for a garden pond can reach a maximum of up to one meter. The least that can be done is 60 cm deep.
a garden pond can reach a maximum of up to one meter. The least that can be done is 60 cm deep.
Leveling:
Now you just dig the hole with the recommended measures, then start leveling the bottom of your pond to avoid some problems.
If necessary, add a little soil, drawing the same hill that was removed in the previous steps.
Lining the bottom:
You can choose different materials to line your fund has leveled: i.e. a rubber can be any one or even a PVC plastic.
This liner must completely cover the sides and the bottom of your pond without many spaces remain.
Because it’s important that this liner is far from sharp objects Pay attention to small stones that can end up damaging the liner.
Finishing the liner and decorating the lake:
Use heavier and larger rocks, putting these on the ground escalate. this Para help leaves the property and intact liner,
As it is very important to put some of these rocks in the lake bottom, now opting for more flat stones than chosen previously.
Placing the pump:
After completing the decoration and lining the lake, it’s time to enter the water pump. Place the same into the hole, placing it in a good spot, closer to the edge
Filling with water:
The pump is ready, put at least some water in the hole, always making sure don’t hesitate holes in the liner, water can escape.
If everything is perfect, continue filling your pond with hose water and after finishing, ie when it is completely filled, turn on the pump to get it to operate normally.
Additives:
Before adding plants and fish to your pond before you have to wait at least 24 hours after its construction.
Similarly, Plants should be placed in dark, small or large vessels because it may be attached to the lake bottom without any problems.
To create some visual interest, place stones on top of these vessels
Finishing:
Now that all construction stages of its lake have been met
The below pictures shows the different types of lake garden
Courtesy: flores.culturamix.com