How to make bead backpack: Today we will knit bag. That is fashionable beaded backpack. This prevents unsightly seams and keep things incredible softness. In their explanations, I allow myself sometimes to refer to the framework presented in the previous master class, not to make the description of it is very large.
bead backpack
1. We need:
1. Beads Czech №10 – 200-250g.
2. Threads gamma about 6 Hanks.
3. Crochet hook number 1.5.
4. Accessories for mounting straps, pockets for magnet valve.
5. Podkladchnaya tissue sinteponovye seal, cord ties.
2. The form of the backpack and its design
bead backpack
Let’s see what is in our backpack.
It is a cylinder with an oval bottom valve narushny pocket and flap pockets. At the same time we will pocket knit together with a rucksack, then  a prepared pocket flap, and at the top  prepared in advance the backpack.
2.1. The size and calculation loops
Details on the calculation of the loops can be found in my previous master class. Therefore about the backpack: my backpack has a base 11 * 18 cm and 43 cm circumference at a knitting density of the beads 4 to 1 cm, we get the circumference of 172 beads.
Knit the bottom of a backpack-cylinder under the scheme.
We collect 20 loops and knit in a circle under the scheme 22 series.
bead backpack
It turns out here such an oval bottom of the backpack.
bead backpack

bead backpack
 As my pocket will be located a couple of cm above the bottom, then knit up two cm without additions. In my case it’s 1 series
bead backpack
As you can see, the edges are rounded and began to form a cylinder.
It’s time to prepare for pocket.
2.2. The bottom of the pocket
My pocket has a bottom square shape measuring 10 * 3 cm.
Picking up a chain of 28 loops and knit by the scheme
bead backpack
happened here is rectangular.
bead backpack

bead backpack
Now WARNING: proceed to mix with pockets
2.3. pocket
Dale will continue to knit two Hanks. pocket will alternately one row of the main, then a series of pocket, with the connecting portion will knit twice.
So, we find the middle rkzaka and middle pocket. Long side pocket have 38 loops. And comparing them against each other.
bead backpack
Knit the main, while at the joint with a pocket, pocket loop and sang together a backpack without beads. As it turns out 38 loops without beads, we have put together two parts. Then complete the circle (up to the junction).
bead backpack
Now knit pocket. At the junction connected loop as if the second level, that is, at the same hole, without the beads. 38 loops.
bead backpack

bead backpack
Then complete the circle next to the compound, as usual, with beads.
bead backpack

bead backpack

bead backpack
With this we get a backpack and a pocket, knit twice.
We continue to knit in the height of the pocket.
bead backpack

bead backpack
2.4.1. Place a button
In my project will link fastened flap pockets on the button. Therefore it is necessary to prepare a place for keys. To do this in the right place provyazyvaem multiple tabs without beads. There in the assembly we will assign button.
bead backpack
The result here is a pocket. After that, the thread can be cut pockets. So the edge will look neater.
bead backpack
We proceed to the valve pocket.
2.4. valve pocket
Valve pocket knit from a single hank slightly larger than the side pocket. Basically, it all depends on your idea.
Three sides of the valve, we also tied step except connection with a backpack. Cut the thread.
bead backpack
Find the middle of a wall of the pocket and the valve midway, draw up the details against each other.
bead backpack
Knit the next row backpack and place the valve connection, with backpack loop and valve, with beads.
It turned out that’s a connection:
bead backpack
bead backpack
bead backpack

bead backpack
Well. The most difficult thing we have done.
We continue to knit in a circle in the backpack we needed height.
2.5. Place a button
In my project, the backpack, the top valve and fastens on the button. Therefore also multiple tabs without beads
bead backpack

bead backpack
It turns out that’s a backpack. Knit up to the point of attachment of the main valve of a backpack.
bead backpack
2.6. The valve of a backpack and a loop
For valve recruit from a single hank 10 loops and knit by the scheme to the desired size. Threads obrazaem.
bead backpack
The result of such a valve.
bead backpack
Eyelet knit simpler flagellum. In this case it is better to knit columns without flagellum nakida. So he will turn more elastic.
I flagellum on 10 stitches. If someone does not knit flagellum, it is done so.
We collect a chain of 10 loops, closed in a circle. 1 rad without beads, then knit circle with beads to the desired length (about 30 cm). Last number without beads.
bead backpack
The result was a flagellum. The threads are cut.
bead backpack
Find the middle of the pack on his back side and compared with the valve midway. Also in the middle of the compound we have two tip loops. We compare parts facing each other.
bead backpack
We continue to knit. When he reached the place of all the details of the loop connection provyazyvaem together without bead to connect the parts. All in the same way as we did with the pocket.
bead backpack
After connecting knit a couple of rows with beads and last series.
2.7. The straps of the backpack
2.7.1 You can link webbing flagellum. Again, I prefer in this case columns without nakida, making softer webbing. You can just take the chain size.
2.7.2. two separate straps can bind. In my project is one long shoulder strap, folded in half down the middle. So convenient to attach to a backpack. Especially since I have it is provided as a removable version.
2.7.3. To be able to adjust the length of knitted straps on both ends I attached the chain to be attached to a backpack carbines. For a link of the chain attach such length and work.
bead backpack
Our back pack is ready. You can be collected.
3. Build
3.1. First attach brackets for mounting straps.
bead backpack
To do this, I schedule fixing points. In my case, there are three.
On the inner side of the article is pasted (or stitched) piece of thick fabric or leather, for which we shall mount bracket. This is in order not to tear the knitted fabric.
Needless staples inserted from the outside into the holes between the eyelets.
Then the lower brackets attach hooks. for them will strengthen the lower part of the bracket.Verhnuu leave just as the ring. Carbine will be at the top of the webbing.
In my project, removable shoulder straps, as stipulated pen loop, also removable. Do you want to – a backpack with straps want – handbag-backpack with handle-loop (pictured above). On the handle, shoulder strap and carabiner attached.
bead backpack
2.7.2. button
On the inside of the product are also strengthening the canvas with a thick cloth. Then install button. The buttons are small, so the “ears” – perfectly inserted between the loops of knitting.
You can start lining.
2.7.3. Lining
How to make a pad with seal for bags (backpacks in our case),
Since the backpack should be pulled together on a string, before how to sew a lining, you need to take care of the ledge for the strap. I made him from a lawsuit. suede-like pocket lining and valve – all visible items.
When assembling a rim sewn between the backpack and the lining.
bead backpack
In both of the valve sewn decorative fabric (lining?). I claim it. suede. Also, the lining is sewn into a backpack pocket.
bead backpack

bead backpack
Whew !! Our backpack is ready!
bead backpack
\
bead backpack
bead backpack
bead backpack
As always, I thank all those who have just looked at my workshop, and a special respect to finish it.
Ready to answer any questions and comments forward.
Also waiting for applications for new workshops. Write what you see is interesting, and I will try to portray it.
Thank you!
bead backpack
courtesy: livemastaer
Shares