How to make casket in the form of heart

casket in the form of heart

Sharing is caring!

How to make casket in the form of heart
casket in the form of heart
For base- boxes we need a three-layer corrugated board and box in form of heart
casket in the form of heart
In cardboard boxes outline the outline, the outline will increase to 0.7-1sm and cut the base of the box (see photo above).
casket in the form of heart
Divide line outline for 2-2.5sm box, and with the help of sewing done by the two holes in the division of space, as shown in the photo above.
We draw up the foundation of the future box , for which we must prepare two white A4 sheet and two napkins for decoupage.
casket in the form of heart
Cut out two hearts from a white paper on the size of the box and plastered base of the base box from both sides. For registration boxes will pick up napkins with a beautiful pattern. For example, we have chosen a napkin with the theme «LOVE» (see photo above), that is just the thing for a gift for Valentine’s Day.
casket in the form of heart
Paste these wipes both sides of the base. After the decoupage give a good base to dry and then use needles size 4-5’s do holes in places previously punctured holes with an awl.
Braided base box with heart-shaped newspaper tubes (paper vine). For braiding the base and walls of our boxes we use the tube, twisted from the consumer (newspaper) paper 29-30sm length and a diameter of 4mm.
casket in the form of heart
Realized in threaded holes on the two tubes. Skipping to the middle of the tube 15 cm.
casket in the form of heart
Entangling ground. Take one of the tubes and go around it the next tube (see first photo above), then, skirting the edge of the base, go around the third tube from the opposite direction (see the second photo above). Repeat this step with the 2-3 and a tube (see photo above).
casket in the form of heart
Then take the fourth tube and it go around the next tube (tube 5). The first tube, which is on the opposite side, go around the base edge of the top of the third tube as shown in the photo above, and carry out a tube 4, continue to weave the tube 4 as described above for the first tube.
casket in the form of heart
As a result, braiding edge we get a nice wicker frame around the base of the box.
casket in the form of heart
On the other hand we have to be ready to guide the vertical walls of the box.
Next step. We Entangling walls of the box, which will set inside a box in the form of the heart, which was used at the beginning of microns, and entwine.
casket in the form of heart
casket in the form of heart
casket in the form of heart
casket in the form of heart
Making the cover box in the form of heart.
casket in the form of heart
Since our box designed for sewing, the cover of our boxes will perform the role of the needle bed. Why do we need a wide 1.2sm foam, cloth and cardboard. From cardboard cut out a heart the size of the base box of foam cut out the three hearts of different sizes: one for the board size, the other two less than 2cm, see photo. From fabric to cut out a heart the size of 3 cm more ground. Next, add the foam cardboard pyramid, will lay on top of the fabric and glue the edges of the fabric to the base board. When bonding is necessary to stretch the fabric to needle bed on the surface there is no slack.
casket in the form of heart
Prepare the top cap boxes, we have prepared the foundation box. Make napkin decoupage on only one side and, on the other hand, attach the prepared cushion needle bed. Mark the holes on the edge of the pads to tubes according 2-2.5sm.  two tubes, as well as to the base of the box.
casket in the form of heart
Then braid the top of the box in the same way as we braided base box only now taking into account the fact that the top side we have the needle bar, see picture above.
casket in the form of heart
View the top cover after the braiding of our caskets see in the photo above. Then braid the wall of the cap as well as the walls and boxes. It should braid all three rows, one row spiral weaving four tubes and two rows – herringbone two tubes.
casket in the form of heart
Close the bottom cover netting wall. Take one of the tubes, go around the next tube on the outside and inside of the tube under the following, thus repeating the wall weave pattern (herringbone). Since we have a leading vertical tube double, first turn down and weave a single tubule, and then go around the second tube, and weave in the opposite direction (see photo above).
casket in the form of heart
Close the bottom cover netting wall. Take one of the tubes, go around the next tube on the outside and inside of the tube under the following, thus repeating the wall weave pattern (herringbone). Since we have a leading vertical tube double, first turn down and weave a single tubule, and then go around the second tube, and weave in the opposite direction (see photo above).
casket in the form of heart
Casket for garment accessories in the form of the heart is ready! So we finished our gift – a great gift for Valentine’s Day and 8 March.
casket in the form of heart
courtesy: stranamasterov

 

Sharing is caring!