A small workshop for making purse.
The basic material (I chose 3 types of skin):
1) vegetable tanned leather 3mm on the outer side.
2) Black Leather 2mm for the pockets.
3) Skin underlayer, I chose a red pig.
Tools and materials for the work:
2) The line
3) Shiloh (or punch holes for seam)
5) Cardboard (for patterns)
Tools for stamping:
1) The rotary knife.
2) A set of trunks for stamping.
Let’s start. Raschertim patterns and cut out of cardboard. purse Dimensions unfolded 21h22sm.
Then mark up our internal content, on the one hand are the pockets for business cards, business cards, a step between me 1.5cm
On the other hand pocket with zipper.
Cut our foundation, I chose the vegetable tanned Shore 3mm. The details of the embossing I decided not to go. Here a small jump in the production (if it is necessary to devote a separate embossing master class on skin).
Here’s what I got.
On purse sew the eyelet for fastening.
On the opposite side (a base) is pasted zipper.
And inside, to be beautiful, podklёvyvayu skin linings (in my case – a red pork).
So, let’s do your pockets. Cut on the patterns. Leather cattle 1.5 mm.
The edges of the inside we have to do is thinner (sherfovka) – before making a knife, now there is a machine made easy.
The rear of the pocket cut out once in one piece with the valve. And apart the front of the pocket.
The edges of which will not be sewn around the perimeter, it is desirable to stitch. Inside glue masking tape, so as not to stretch the skin (if you sew by hand, this problem should not occur).
We begin typing our pockets for business cards. 2 and 3 need to stitch detail below, to small not failed. When we collect all pockets stitched by the middle vertically.
Putting pocket with zipper. On the outer part of the valve and put a zipper pocket. Pocket to the exterior of the purse I baited glue.
Glue well around the perimeter of our pockets for business cards. The face of the punch to make holes around the perimeter and begin to sew our purse, thus sew the inside. Saddle stitch sewn 1mm waxed thread.
Here’s what happened inside.
Overwrites the edge. I used brown cream paint Kenda Farben
A little polishing here is the result! Thank you for your attention, I hope to be useful!