The original dress will please not only the mother but also the very daughter. It is convenient to dance and even play mobile games. It does not contain the extra rings, which prevent the child seat. The rest of the dignity of dress you can assess for yourself if it sew. It consists from top and skirt sewn together and Petticoats.
To work required:
• Krepsatin 215 cm. And a width of 150 cm.
• Mesh or nylon 150 cm. And a width of 150 cm.
• Bias binding 10m.
• Satin ribbon white 16 m. (13 flowers + 3)
• Thread 2 coil (color purple, white)
• The hidden zipper 25 cm.
• The needle with a wide eye
• Pins with heads
• Templates with the cells 3 and 6 cm. (They can be made from a sheet of paper, raschertiv equilateral cells and make a hole at the intersection. This greatly facilitates the work of the pattern.)
• A piece of chalk
Measure out and cut them krepsatina piece 210 * 82 cm. (The item 1), treat the edges with a overlock, put up the wrong side. From each of the three sides of the note by 2 cm. Seam allowance as shown in the figure. Coming from the line marking pattern through the cell 6 * 6 cm. Plot the point marker on the fabric. Remove the template and connects the dots on the pattern of “Wave”. We connect the two ends of the skirt and stitched by a typewriter. This seam will be hidden from future folds. To sew a hem bottom right oblique Bakey and only then begin to puff assembly (folds) manually.
Vdevaem thread inserts a needle into the top of the segment and are attracted to her second top. Fix a double knot. The thread is stretched, without cutting, to the top of the second segment, not contracted, make 2 stitches, and then attract to this place a second vershinku second segment, etc.
The finished skirt need is gathered on the child’s waist and at the hem make the assembly (see. Figure). The length can be different, increasing or decreasing the distance prisborivaniya.
From the rest of the tissue is necessary to carve out part 2 size 58 * 44 cm. Also, treat the edge. Retreat to the left, right and bottom 2 cm. Seam allowances and outline the line of which shall apply the pattern rapport “Braids”. Measure out the top 40 cm., We put a chalk line, which is then applied to the top edge and fix with pins. Impose a pattern with a cell 3 * 3 cm. And set point through the hole on the underside of the fabric. Template remove and connect the resulting point of the lines according to the pattern. Assembling puff of a pattern similar to the pattern of the skirt assembly. It remains to press the folds and carefully sew the zipper.
Of the remainder tissue cut out two pieces of the future of the straps 25 * 15 cm., On the wrong side and stitched by every gut-wrenching. Then, on top of the stamp making 4 small build, not pulling the cloth – 2 front, 2 rear. These are the places of fastening straps. We apply the straps to the front seam down, tucked inside the folded ends of the fabric, pin up pins. On the back of their intersecting and we attach to the back of the stamp in the same way. The edges of the straps on the back are a bit inclined, this happens due to the crossing, do not forget.
When all the measurements will be carried out, and the straps are connected to the top, top stitched by cloth so that the ends of the lightning and the edge on the sides were inside. Now, the assembly can be contracted.
PARTS 1 and 2 at the waist line.
Croy “sun”. Fold grid otrez four times, then in half again. Measured from the top of 60 cm and 10 – 15 cm. For the inner circle.. Cut. To sew the hem oblique Bakey the same color as the skirt to dress. Underskirt can sew to the main body, and can be done with an elastic band, to whom it is convenient. He gives the dress splendor.
It remains to decorate the dress with roses. On 1 take 1 m Flower Ribbon. Form the flowers apart from the dresses, and then sew them on the assembly site. The figure they are marked with asterisks. From the same roses make a decoration on his head.
Attire for my daughter ready!