How to make luxury handbag for bride’s

Sharing is caring!

I propose to sew luxurious bride’s handbag decorated with puffed “weave.”
manufacturing method and materials allow to cope with this work to anyone who knows how to sew on buttons and sew a hidden stitch
It should warn a slow and meditative work.
You will need:
  • cloth “face”: satin, silk or crepe satin. Enough to cut 65 cm in length;
  • Lining cloth;
  • clasp rectangular 34,5h7,5 cm;
  • soft cord 126 cm;
  • Sewing ordinary thread blestyuchie beautiful, strong thread – all white;
  • good pair of scissors;
  • needle favorite;
  • flexible plastic cutting “board”;
  • thimbles or plasters.
Strongly recommended to keep on the desktop: cheesecake, coffee, ink and other products soiling and things
Let’s get started
1. cut out the main item that will decorate puff .
Searing edges lighter or a candle. If the fabric is not singeing, obmёtyvaem zig-zag or overlock.
2. Make a template to mark (you can use ready-made “weaving №3»).
Cut the paper into the cage strip 6h20 cm on the short side -.. Necessarily 6cm longer possible on the long side.
If you do not have paper in the cage, take the ordinary and draw on it a grid in increments of 1 cm.
Fold the sheet in half along the long side. Cut small corner through every centimeter, focusing on cell lines.

Is folded along the strip 1 cm. Again we cut corners.


1 cm is folded along the strip  to the other end.  Cut the corners.

Expand. We got a quick template for drawing layout .

3. Apply markup.

Draw a line on the cloth along the middle of the long side. The short side – the width of a handbag.

Please note :

Above and below is indented 3 cm.

Middle glad left triple series lies on the mid line tissue. We start from the middle of the layout for symmetry

For convenience, I have pasted marking fabric masking tape to the mat for cutting. You can stick to the table.

Pencil Dotting this: put a pencil in the right place and rotate it slightly around an axis – Get Excellent point without bias fabric 🙂

On the template I drew the lines of the scheme for embroidery. It makes more sense to apply to the cloth only those points that will sew – they connect the lines on the template. If you are so enthusiastic about the process that put all the points – read on 🙂

Once all the points marked shift to the right pattern, aligning the holes left three rows of dots on a cloth. Draw points in three rows of the right template.

Then we shift the pattern down, aligning the top holes with dots and a second series of holes with the line in the middle of the tissue.


4. Once you are finished dotting, you can proceed to the application of the scheme or just sewing.

The circuit  looks like in the photo. At points we draw a “herringbone” . Branch left, right branch.

We will connect the dots on the “branches” ends, forming wrinkles on the face.

Some points – extra. If you have caused them, just ignore in the process of sewing.

I sew on points, so I have not painted with the entire surface.
5. Begin stitching puff “weave.”
It is best to use the strings in the tissue tone. For the atlas is to take a brilliant thread. Matt may be visible on the front side.
Fix the thread at the bottom point of the lower branches Christmas trees.
Grab the top point stitch 1-2 mm.
Again, grab the stitch 1-2 mm in the lowest point of the branch.
Pull Pull connecting point 🙂

Tighten the thread connecting the point and the  anchoring knot to the point of not dispersed.

  • go to the lowest point of the following branches;
  • fasten thread at a knot;
  • grab the upper point;
  • grab the bottom;
  • tighten the thread forming the front side of the fold;
  • anchoring knot;
  • repeat.
 6. Break.
Tailoring puffs – this is the most lengthy process. I ask for 4.5 hours.
It’s time to enjoy the work done.
Wrong side:
7. Paving the lines along our beauty at a distance of 1 cm from the edge  on the zero thread tension.  On each side – its own line. We will tighten them.

Pull strings, pulling the fabric edge to the size:

– 23h36 cm, measured from line to line;

– 25h38 cm, measured from edge to edge.

Threads after tightening is necessary to tie to edge length is not changed.

Next, we will make “pocket” into which the plastic insert in the future.  So our bag will keep shape and shine in all its glory.
Cut out a rectangle of 25h38 see any white cloth.
Chop off the front of a stitched puffed and this rectangle  along the long sides. Sews at a distance of 1 cm from the edge of the fabric.
 18 19

For bags need side walls with a rounded edge. Making their way:

Unbent paper 8 cm. Take a piece of string or thread 18.5 cm long and lay rope edge of the side wall halves. Top rope goes vertically from the bottom is rounded.

Draw a line along the Cords, cut out.

According to the paper the pattern cut out 2 pieces of side wall bags . Searing them or obmёtyvaem.
Then chop off the base. Put a “face to face”, connect the first midway, and then around the perimeter, sews , departing 1 cm from the edge.
 21 22 23
8. The front part of the head. Making the lining.
To do this, cut out 2 pieces of the side wall on the pattern of our paper and 2 parts 26h20 cm.
Details 26h20 see we put together “face to face” to flash on the long side: line 2 cm from each edge .
Thus we connect these two parts into one, so that it was easier to sew side cover. But , as we connect only on the edges, we will be at the bottom of the hole. It will need to sew clasp.
I have not put photos on sewing padding. The process is similar to the front side. On the question always answer
Lining is not turning out, we put on a “face to face”. Shear bokovinki and one front side. Sews at a distance of 1 cm from the edge. One side does not connect.

9. It is time our brand new cutting plastic “boards.”

Cut the rectangle 22h36 see it and paste it into the pocket.

 27 28
To clasp it easier to sew,
Sews small stitches to the plastic bag on the edge , at the same time sewing up the hole pockets.
10. We’re almost at the finish line 🙂 sewn clasp.
First, add up the side walls of the half, marking the middle.
For this purpose, anchoring it on basis . Insert the plastic part so that the side of the plastic edge is flush with the inner edge side of the clasp. If the plastic does not want to be inserted, do the first stitch through the opening in the frame through the plastic at a distance of 5-7 mm from the edge, again through the opening in the frame. Tighten the skin, pressed against the plastic frame, and enters into the groove.
Sew on the clasp through the opening in the bottom of the padding.
We combine the middle of the side wall with klёpkoy clasp. Fix the thread from the inside. Sew forward needle.
Sew on the zipper … Here I would like to say that it’s easy. It’s really easy when shёsh tenth. Here everything is buttoned. It is necessary to get to the hole from the inside. A very useful lesson: encourages spatial imagination, patience, blood circulation in the fingers and brains
I’ll leave one line in order to maintain the rhythm of the folds. You can lay another line, then the outside seam line is continuous.
11. sutured bedplate a hidden seam.
Handbag is almost ready.
12. Make the handle.  You can skip this step and use the chain. Choose it carefully. The chain of touches clothes.
Cut three textile cord length of 42 cm and three strips of satin 60h3,5 see.  Searing edge.
Sewn strips, departing 5 mm from the edge. On one end of the leave 2-3 cm is not stitched.

Wrenched strips. Insert the power cord with a small pin or thread with a needle: a needle vdevaem strong thread, anchoring it to the end of the cord, vdevaem through a tube made of satin eye forward. We take out the needle and thread at the other end and pull. 2-3 cm not hardwired to be easy to pull with the other hand to meet the cord.


Putting the three together cord. The ends have hollow, so we put them together with a needle and thread to sew up to the point where the cord inside begins.

Plait braid, fasten the ends.

The handle to sew the bag. Clasp Rings quite large. If you do carbines, it would not be very nice.
We put all three ends of braids in the ring.

Bends, sutured. Excess cut and neatly cut Sears.


To hide the seam Cut two squares of 6×6 cm, Sears.

Fold the edges sutured.

Sewn stripes, putting the edge to the middle of the handle.

Wrapping is folded edge and sew blind stitches to the bag.

🙂 All our bag ready.

As usual, I authorize the use of a master class for:
1. Manufacturers of handbags for yourself / for free or for sale.
2. To train other people sew puffs, including fee.

I would be grateful for your vote . What. I also want the prizes

courtesy: livemaster

Sharing is caring!