How to make a mini house

How to make a mini house

So we need to work:
– Watercolor paper
– Corrugated cardboard (small)
– acrylic paints
– glue
– Dense film
– Straw (can be replaced by paper)
– Soft flower (floral moss)
– sparkles
– Pintsetik, scissors, stationery knife

Step 1.
Please print out the pattern, or draw a house – the wall and the “bottom”, on watercolor paper.

Carefully cut out the details, the windows – a knife with a ruler, folded along fold lines.
Cut the roof of the small corrugated cardboard, folded in half, hole punch to make holes for the pipes.

The edges of the roof, I cut the scalloped scissors. I pictured an extra allowance on the bottom of the house, I gather it then.

Step 2.
Paint all the parts of acrylic paint. The walls and bottom of both sides brown, brown the top of the roof, the roof and the bottom – with white paint.

When the paint has dried, apply a coat of white acrylic on the wall. While the white paint still wet, quickly scribbled a toothpick bricks.

Step 3.
From dense film cut out “windows” transparent adhesive stuck on the inside of the future house.

Step 4.
Now we need to draw the window. I do not think of anything more intelligent than to make perekladinki from threads windows. Cut the thread segments 10 and pintsetikom glue on transparent glue.

Now we make the frame in the windows: it is necessary to split straws, measure out the desired length (about 8 mm), and cut into 10 equal pieces. Glue a pair of tweezers, as in the photo.

Cut 10 pieces of straws by 5mm, to finish the frame by gluing the pieces at the top and bottom of each window.

Door Wallpapers shaded strips without measuring out the size – and then easily cut off the excess.

Here is our intermediate step, the door handle, I pasted – another piece of straw.

Step 5.
Now, I painted our door and frame in white, but loose, so that shone straw texture. At the bottom of the house pasted another straw – type foundation 🙂 Now you can glue the wall.
To cut the pipe, rectangular piece of watercolor paper (to the eye) and paint it in the color of the roof, on both sides.

The tube is twisted, try on, glue, paste it into the hole. On the underside of the roof gently pour the junction of the roof and the pipe glue.

Step 6.
I did not leave allowances for bonding roof, glue the roof to the walls directly into the joint. Thickly smeared with glue, this is the joint))

Dress up the roof, dub, leave to dry. If the roof is too much hangs on the sides – it can be trimmed. Now you can glue the bottom, and the house is ready.

Step 7.
Now put things beauty 🙂
Signboards « Welcome an e», I printed out on aged paper in the office coffee, smoked edges distress ink, taped over the door, taking a little glue on both sides. You can print this:

Bronze loop fabric (or glass – without a difference), made a little point on the sign – cloves. The roof and the foundation here and there anointed with glue, then sprinkle the house floral mix, winter house I was doing in the snow, but this year – is overgrown with green moss. Svёrhu little bit more sequins (I used glitter polish). Several strokes bronze loop on the roof, pipe, and around the door …

Behind glued tiny heart – took it from nail decorations.

Here’s a house I turned out 🙂 I wish you all a joyful creativity!

courtesy: scrapshopchallenge