On the outskirts of the village stood an abandoned well, and then he was covered with moss and lichen, but more recently with him in the house settled by new tenants, which gain of the new bucket, and the well was given a second life 🙂 🙂
Here’s a story I was born in mind when doing this workshop 🙂
And in fact, recently I was asked to make a miniature log cabin to a well in a log when the structure began to look for, what it looks like, anywhere has not found any information (except, of course, large wells). Well I did, and at the hut he had gone home to his mom!
And I decided, since there is no information anywhere as to build a miniature well with your hands, I will do a master class at him!
Well 12h15 will see, this is not a shop
And so we begin !!!!
Materials and tools that we need:
– Willow branches or any bushes of different thickness (thicker carcass will go to the rest of the roof construction);
– Tree bark (I pine bark);
– Moss;
– Birch bark;
– Dried flowers (at your discretion);
– Clips;
– PVA glue;
– Clay time;
– Super glue;
– Acrylic lacquer;
– Small cloves;
– Aluminum wire (or any other) to handle the well;
– Knife stationery;
– Line;
– The cord (I waxed).
Begin making framework. Cut branches from 16 pcs. “Brёvnyshki” (16th go to shop) to 8 cm.
Treat the edges of each “brёvnyshka”.
We share one along the “brёvnyshko” into 2 parts. In other “brёvnyshkah” cut out grooves, departing from the edge 5 mm.
Putting frame 2 rows, nailed studs, how was still cobble together
two rows again (you can all stick together with superglue, but since I will be well, “an old” in moss, all of them closed cloves).
The height of the carcass should get a 5 cm.
Then cut into thin twigs for the construction of the roof – 2 pcs. 15 cm; 2 pcs. 10 cm; 3 pcs. 12.5 cm; 4 things. 7 cm (can be 5 mm longer, as it will be necessary to adjust). cut out the drum for the well length of 5 cm from the thickest branches (I got in diameter 1.5 cm).
Set the rack (it swallows, which are 15 cm) before it will need to cut grooves, departing from the edge of 4.5 cm. Levels, nailing.
Then set the transverse strips (which are 2 pcs., 10 cm) in the grooves of glue super glue.
Set sticks, which have 3 pieces. 12.5 cm, they also do the grooves and nailing.
Then take 4 sticks (which are 7 cm), set up the so-called rafters glue.
Pliers to bend the wire to the aluminum handle and a drill hole in the drum.
The vertical rolls drilled holes, too, departing from the bottom of 9 cm and set the knob to “wearing” her drum.
Next, make the bench of the remaining “brёvnyshka” (how to shop, I did not take pictures, because who mastered frame, the shop certainly do without any problems).
Glue the tree bark (superglue or torque, well suited glue gun).
Then, well decorate moss (lichen can be added, as I have in the photo). We cover the acrylic lacquer. While the well dries, let us do a bucket of bark!
Cut off a piece of bark measuring 9 x 3 cm are doing “ears” is to handle the future, departing from the edges by 2 cm.
Merge Template, cut out bottom of a desired diameter, glue superglue.
Cut 2 strips of birch bark 9 cm x 5 mm.
Glue the strips on the edges of the bucket. The handle of doing the usual staples, pliers straighten, bend, vdevaem in “ears” bucket.
That’s all ready a bucket! I’m on strips made small holes for decor.
When the well is dry, wax cord wrap handle (sticking at the time), then the same rope cheat one tip on the drum, and the other is tied to the bucket.
Well, that’s our miniature minced well with a bucket ready!
As well and a bucket can put dried flowers (statice), as Vodicka (but it’s up to you).
Enjoy watching!
If there are questions about the master class, be sure to answer!
Important! By copying, partial use, the census reference to the original source is acknowledged with an indication of the author of the master class!
Thank you for understanding!!!!
courtesy: stranamasterov
