How to make an oil lamp

Sharing is caring!

How to make an oil lamp
oil lamp
For the manufacture of miniature oil lamps, we need:
match
copper wire
thick woolen thread
butter
tin tube
oil lamp
The thread will serve as a wick. The thicker it – the better. Any thread quite easily absorb any liquid, and the laws of physics raise the fluid to the thread up – and use it. First you need to make a foundation for yarn – a column on which it is wound. To do this, take a match and wrapped it tight ring of wire.
oil lamp
 Gradually, winding spiral wire on the match, we get a basis for the future of the wick.
oil lamp
 When we wrapped the whole most of the match, we remove it from the spiral. Leave the bottom of the tail – it is necessary for stability. Copper wire is best suited for such manual work – it is easy to bend, and quite beautiful.
oil lamp
 Now you need to wind the thread on the spiral.
oil lamp
 Bottom-up pulls the thread tight spiral, threading it between the little spiral rings. On top of the small end of the thread reserve, fluffed his fibers. If this structure to put the oil container at the bottom, the oil impregnated yarn end to rise up. That’s for this and need a tin tube. Put a little oil in it and put inside the wick.
oil lamp
 Needless oil does not burn, but the wick, soaked them burn very well. Of course, it does not fit any oil – you need to buy in the store that is designed for aromatic lamps and candles. It remains only to burn!
oil lamp
 It is not necessary to use a cork – will suit any metal container into which you can pour a spoonful of butter and put the wick, which we did.
oil lamp
courtesy: liveinternet

Sharing is caring!