How can we me beautiful organizer by our own hands? Let’s see how it works.
Now, pockets them to the organizer will be three: two small and one large.
Trim I do not throw away, they are still useful to me.
Fold lines selling the blunt side of the knife and bent, Binding cardboard can be a little burst on the deflection, but that’s okay because the pockets are plastered on both sides.
After scoring bends straightens his pockets and begin to paste them with a linen cloth.
The joint at the bottom of the glue stick together Moment gel, gum well helps to pull the details.
The inner walls of the pockets, I pasted a thin cardboard, covered with fabric in polka dots. Cardboard for this purpose I took from the box of cereal or a thread, it is quite durable.
Then how did the layout will be located pockets on the front of the base and made a slit with a knife stationery. Now you can try to insert the pockets in place.
The view from the back side.
Pockets tidy and paste linen cloth front portion of the base. Cut through the slot on the inner dimension to be able to fold the edge of the fabric inside the edges of sizing adhesive gel Moment, as they are coated edges of the inner wall of the pocket. Moment gel is very good for this – it allows you to secure the fabric based and does not give it to crumble.
When everything is dry, insert pockets on the seat and back in business Moment gel, it is necessary to fix the pockets in place.
The flaps are folded in and a good cuddle. While the glue dries, it is necessary to drink tea, because then the fun begins …
On the front wall pockets, I decided to place a needle bed to take this thin cardboard, paste cloth substrate with polka dots on the edge pasting decorative tape-bindweed. Cut the base of the binding of cardboard and glued to foam it, then skin-tight circular needle bar decorates it and is secured in place.
It remained to be done for malymf6 mounts thread.
I take this piece of wood the size of 3 cm to 35 cm and cut out bamboo sticks 12 pins 6 cm.
The holes for the pins to be drilled at an angle of 45 degrees, it is not difficult to do, I took the bit in size pins, the first two turns of the drill done vertically, then turns on the drill angle, got what we need.
When all the holes were there, I pasted cloth strap with polka dots and an awl has done in her hole.
Now I need superglue to stick firmly pins, you can, of course, and the moment Joiner do it, but somehow it seemed to me more reliable than superglue.
Remember, I said at the outset that the crop is not thrown out, here they are useful to me. Pruning I filled the empty space that was no failure between the fundamentals, then cut edging of cardboard binding so that it protrudes by about 0.5-0.7 mm from the edge. To me turned edge, I first glued tissue in peas, then edging cardboard and fitted a rear side of the same cloth.
And slips ready:
It now remains to glue the back side. From the decorative tape, I made loops and secure them in between the fundamentals.
