Hello dear masters and!
Today I want to tell you and show you how to sew a patchwork apron and oven gloves to him.
patch work apron
For work, we need:
1. 8 combined for coloring fabrics (I use cotton and linen);
2. The fabric for the lining (my cotton);
3. Yarn;
4. Pin tailor;
5. Scissors;
6. ripper;
7. Ruler;
8. Pencil;
9. Graph;
10. A sewing machine;
11. Iron;
12. Mat cutting;
13. The line of patchwork;
14. The knife disk.
Also, for the manufacture of tacks you need filler (it may be padding polyester, cloth, flannel, fleece). I use cloth.
And yet, if the mat, ruler for patchwork and disc coulters are not available, then, if you wish, you can do without them.
patch work apron
First make a patchwork fabric for a skirt.
In finished form side of one square should get a 3.5 cm. The allowance is equal to the width of the foot of the sewing machine. I 0.75 cm. Therefore, my need to be squares are cut from the side of 5 cm.
You can of course cut out each square separately for cardboard template, and then collect the drawing. But I’ll show you a quick way to build.
Cut out from each other than the lining fabric on the 3 band width of 5 cm and a length equal to the future of 15 squares – it is 75 cm, but I advise you not to carve out even 75, and add 2-3 centimeters (77-78 cm.).. If your sewing machine foot width of the other, the need to recalculate the width and length of the strip.
We spread the band in the order in which they are placed on the drawing.
patch work apron
Since the figure has a different direction, the upper and lower part of the patchwork fabric will do individually. First make the lower part. For it will need one lane each tissue.
Take the first couple of bands and grind together.
patch work apron
Without breaking a string to grind off the second pair, and so all four bands couples.
patch work apron
Otutyuzhivaem each pair of first bands from the wrong side along the seam, then turn down the top bar on the front side.
patch work apron
Iron the edges toward the second seam strip.
patch work apron

Further, each pair of sequentially sew together.
patch work apron
Now press out seams in the opposite direction to subsequently avoid unnecessary tissue thickening.
Here’s what you should have on the reverse side.
patch work apron
Fold the resulting fabric along the inside out, combine slices.
patch work apron
We grind.
patch work apron
Iron the edges seam is inverted on the front side. Spreads.
patch work apron
Cut the “rings” 5 cm wide.
patch work apron
You should now have 15 “rings”
patch work apron
We spread the bottom of the apron pattern.
Ripped the top seam of each “ringlet”. It ripped, not cut off, because SEAM we still need.
patch work apron
Sew together all the band. To squares were smooth and not “walking”, each pair of lanes should be chipped pins, aligning seams.
patch work apron
Iron the edges seam.
patch work apron
So we mix all stripes. We get a patchwork fabric for the bottom of the apron.
patch work apron
Here is the wrong side. Vertical joints zautyuzhennye in one direction, the horizontal – in different.
patch work apron
Now for the upper part of the apron. Sew the remaining strips, keeping their order. Stitches press out in different directions. Fold in half lengthwise, grind, otutyuzhivaem, to turn out on the front side.
patch work apron
“Rings” Cut.
patch work apron
Focusing on the lower part of the figure patchwork fabric, lay the upper part of the figure.
patch work apron
Ripped the seam of each “ringlet”, adjacent to the bottom of the quilt fabric.
We get the picture top.
patch work apron
Sew strips together. Stitches press out the side opposite zautyuzhennym seams underside of the bar. We connect the lower and upper fabric. Good otutyuzhivaem.
patch work apron
Make a pattern.
patch work apron
Spread on the pattern patchwork canvas. We follow the pattern. It should be symmetrical. Cut out the pattern for free allowances.
patch work apron
The fabric for the lining folded in half and cut out part of the apron. Detail of lining fabric to make to 1 cm. More.
Fold along the wrong side of the upper part and the part of the lining. Shear pins.
patch work apron
Now we need to quilt sandwich. Lashes can be different. I lash “in the groove” in drawing, ladder, every 3 square starting from the central.
After the stitches cut the excess lining fabric.
patch work apron
For the treatment of cuts, straps and laces we need a bias binding. You can use ready-made.
And you can make your oblique Bakey. Since the inlay will perform another function laces and straps, make it a double. For this strip is cut out 6 cm. By 45 degrees. For the apron we need a bias binding a length of about 4.5 meters. To get a long Bakey, join strips together, right sides at a right angle, shear pins, sew strips together as shown in the photo. Cropped excess seam iron out. Fold in half lengthwise and Bake priutyuzhivaem. Thus, the shelf inlay width is 3 cm.
patch work apron
Please treat inlay top, side and bottom sections of the apron. The side sections of the bib is left open.
Putting open sections and Bakey Bakey apron and sew from the wrong side of the apron. For the convenience of anchoring pins. On the rounded little podrastyagivaem Bakey.
patch work apron
Bakey is folded up and priutyuzhivanie.
patch work apron
Bakey turned away at the front of the apron and sew, covering the previous line.
patch work apron
Now treat the side sections of the breastplate, at the same time fulfilling the ties and straps.
To measure out the strings on Bakey length of 65-70 cm and pinned her with a pin to the wrong side of the left cut bib. Sew.
To measure out the straps of 54 cm. And again pinned down. Bakey sew on to the wrong side of the right cut bib. Length is the length of two strings first. Cropped Bakey.
patch work apron
Handle inlay apron to the front. We begin sewing the right strings.
The tips of the laces buckle and sew or refueled inside.
We remained part of the patchwork fabric. From it we sew two potholders.
Rip out the desired part, we gather two of them square of 5 squares.
Sew, otutyuzhivaem.
We cut out the squares slightly larger of the lining fabric and of the filler. I have two layers of cloth. Sandwiches shear pins and stitching.
patch work apron
Pattern tack with a side of 18.5 cm. Prepare the future loops.
Cut out the pattern on pot holders.
For the treatment I use potholders unilateral oblique Bakey width of 3.5 cm.
Before stitching Bakey need to bend the edge, as shown in the picture, and secure with a pin.
Sew around the perimeter of the future Bakey tack.
patch work apron
Press it onto the front side. Baste loop.
Hem, sew Bakey from the front tack simultaneously When sewing eyelet
Bend the loop up and stitched.
Ready tack.
patch work apron
Apron can be used as two-way.
patch work apron
Thank you for attention! I would be glad if someone will come in handy, my MC.
I wish you all success, inspiration and new ideas!
courtesy: stranamasterov
Shares