Purpose: interior decoration, gift.
The goal: the production of articles made of corrugated paper
Tasks:
-poznakomit with technology to work with crepe paper;
-zakreplyat skills of work with a pair of scissors;
-razvivat fine motor skills of hands;
-razvivat creativity, imagination and fantasy;
-vospityvat accuracy, perseverance in the work;
-vospityvat artistic and aesthetic taste;
-razvivat interest in arts and crafts, a desire to do something original with their own hands;
Materials necessary for operation:
-gofrirovannaya paper of different colors (blue, green, light green, blue, brown, dark and light shades of light yellow);
-cardboard;
-oazis for dry or fresh flowers;
-glue stick;
-provoloka 2mm;
a prime pencil;
-flomaster;
-scissors;
on decorative “shaggy” wire;
-stationery knife;
-kleevoy gun;
-kley for glue gun;
-tarelka and cup for stencils;
-passatizhi or pliers;
– Bamboo sticks of different lengths (30 and 25 cm);
– Toothpicks.
Description of work:
We start our process of manufacture of a peacock.
Step 1. From the oasis of dry (or wet colors) office knife cut out the template for the peacock. The material is very easy to cut the oasis, so it is very easy to do.
Step 2: Using a pencil and ruler divide half a sheet of cardboard and draw a line.
Step 3. Use the plate (or any other object rounded shape suitable size carton) round out the edges of our board (as if pushing the plate to the edge of the board).
We do the same thing on the other side of cardboard.
Step 4. Use the cup draw a semi-circle whose diameter corresponds to the diameter of the “body” of our peacock.
Step 5. felt pen draw a zigzag line and an auxiliary cut off by her excess cardboard.
That’s what should happen after these actions.
Step 6: Take the blue corrugated paper and using glue gun is pasted over the front part of our peacock.
Then brown corrugated paper pasted over the back, leaving a “skirt”.
Step 7. Take our blank cardboard, put it on the corrugated paper and cut the green, up to 2 cm around the perimeter of the workpiece.
Step 8: Glue the green paper to the cardboard using a glue stick.
Cut the green corrugated paper and another workpiece is pasted to the back side of the cardboard. Cropped excess paper.
Step 9. Take the wire 2 mm in diameter and cut off using a pair of pliers or a pair of pliers 2 length 10 cm long, 2 length of 6 cm long and 2 segment length of 3.5 cm to curl one ‘legs. “- Three fingers in front and one – back.
Take the brown corrugated paper and wrapped it all “fingers” on the feet. Fixed with glue-gun.
Step 10. Take the bamboo sticks and toothpicks and glue them to our procurement of cardboard using a glue gun, alternating between them. Toothpicks glue underneath.
Step 11. To produce “eye” on the peacock’s tail, we need to 47 rectangular pieces light green, light brown, light blue and dark blue colors of different sizes for large “eye”, and for small to 6 rectangular pieces of the same color.
Cut the rectangles and ovals is pasted to each other using the sequence shown-glue stick.
Step 12. Glue using a glue-gun our “eyes” on the peacock’s tail.
These are three of the peacock have turned out: the body, legs and tail.
Step 13. Begin to collect our bird: glue the tail to the body with the help of glue-gun, bending notch back and insert the legs, adjusting the balance of a peacock.
Step 14. We start decorating our peacock. Take corrugated paper light yellow color and cut rectangles measuring 4 x 2.5 cm. They are, we need 40 pieces. Cut out rectangles made similar to the petals, then use the marker on the edge of the paint black stripes, feathers.
Step 15. Glue our “feathers” at the bottom of the peacock’s tail.
Step 16. Cut corrugated paper blue 10 bars in length 15-17 cm and cut out of them long feathers. Glue them on the back of the tail of a peacock, green closing notches on which the tail is held.
