we need to work: bottle, PVA glue, acrylic paint white primer paint acrylic pearl and bronze, purple, bitumen wax, lace, Acrylic paint, brushes. as in the previous post (Sicilian lace. Almost) was billed several works, and pictures, I did not all, will talk about the pics, that is. But these steps are the same type so that you will understand.
We buy lace with a raised pattern, similar to the quality of cotton. during operation, they will be cut, depending on whether we need. You can use the old knitted cloth or something else, but that figure was convex.
but are not prominent lace we do not fit. Quality similar to synthetics – is not necessary.
1 bottle or something else my, degreasing, grunted white paint, dry them well.
2. cut out the lace on our size, depending on where we arrange their
3 very thickly smeared with glue PVA is the place where we will have lace
4. take themselves lace (metered in our size), and directly dip into the jar with PVA, the good soaking.
5. take out the lace remove the excess PVA PVA hand in a jar (Part lace visible)
6. and glue on the bottle, gently straighten. where lace puff up, because they are straight, do undercuts. a word seeking to ensure that they are tight, without wrinkles and seams lay on the bottle.
7. then leave to dry until the next day – everything must dry thoroughly
8. Now paint all very carefully. especially all the holes lace.
9. after we painted, take the dry old enough or thick brush and begin to clean up the paint in excess of lace holes – just hit the top down on the lace pattern (but without fanaticism). This is to ensure that the paint is not scored relief lace along its entire length.
10. The next step is to make more three-dimensional lace. for this, we need to put on lace bitumen wax (as you can and clear, but I do not have). Wax adheres to the lace and how to raise it. if the wax is not at all, then paint lace paint again (step 9). Photo 11 of bronze bottle. and for the purple, I did not use wax, and once dyed lace white paint (photo 12). all this is what happened as if we have allocated lace. it has become more three-dimensional (photo 12, 13)
this bottle I also really liked (and you can see – as it will if the lace is not white and dark)
Now paint lace pearl acrylic paint. it dries to give a silvery reddish hue. I painted. and at the bottle and also walked a little
same thing for the purple bottle. near the lace are passed too little white paint, creating a sort of shadeBG
and that’s what got …
and the last stage. we have to paint the bottle in the same color as the lace. in a previous post I have, it remained purple. but then I took the risk, and because it is already 2 times Yachting colored lacquer, then paint one part of a bottle of the same paint as the lace.
Now, this is the point, as I understand – Sicilian lace – it (lace) as it merges with the bottle, it becomes a part of it. Remember, there are stone jars or something there yet. and purple paint around the lace – like shade, partial shade from the lace.
in general, I realized this way.