How to make quilling turtle

Sharing is caring!

How to make quilling turtle
1
It makes simple, uncomplicated … Getting ?! Large circles on the shell 7 pieces, each of as many as 4 twisted strips of any selected color you (even though gray-brown-crimson speckled …) With me it is shades of brown. Twist shaybochki, gently press the center and glue missed inside.
2
Little shaybochek 6 pcs. and they are made as well as large, only two integers polosochek
3
For the legs, and they have our beautiful (oddly enough) four, too, will need 4 stripes + small piece of corrugated paper for finalization … Just curl all stripes, slightly dissolve the shaybochki make it easier to take the form of a drop, dent center and coat with glue.
4
For a shell of corrugated paper curl two large circles (strips 1cm wide and 53 cm long) need 4 strips of 0.5 cm (ie, cut along).One lap reserve a flat – this is the future of the abdomen (do not forget to lubricate the glue properly). The second round beautifully squeezing and sizing again. Let dry, and we begin to head.
5
A strip of corrugated paper cut into three pieces and one of the billet is twisted stripes to the top of the head. We attach to it a little oval, dent and coat with glue inside. For the lower part of doing the same thing, only zagotovochka should be a little less (cut 5 cm), but it needs to squeeze a bit tricky: on the one hand slightly inward (in this recess, we will insert the neck), on the other hand – out. Sizing and leave to dry.
6
For the neck: on a strip of corrugated paper note 6 cm and add up to four additions (so head will hold tight), the bonding layers and the tip of a little twist and glue, too. It is this twisted loop is attached to the bottom, sunken into the head …
7
8
When the blanks for the shell dry, glue them together.
9
And on top of a beautifully laid and the glue shaybochki, large and small
10
Bottom legs
11
And now also the head, neck, giving a beautiful bend …!
12
Eyes can be purchased ready-made, and I have just two circles of paper, one more black, the other white smaller, and on top of tiny bead …!
13
Dandelion, of course, if desired, but I think it gives beauty naughty and playful way … Although you can come up with another: Your tortoise can chew grass or cabbage leaf, and maybe drag myself to the book (source of knowledge) !!!
14
15
And a small bonus !!! I want to show what is going here from a dandelion bud:
16
One whole yellow rim is needed in order to create the necessary vacuum in the flower, which is planed to curl the fringe of the two halves of the yellow and green stripes width 1.5 cm. Cutting of need to bend slightly, thus created a beautiful volume … The green striped part of a finely chopped, and made part of the fence (it was his need to twist in the opposite direction of the total twist). All stripes glue, twist slightly pressing in the middle of a deep, glue bedplate. Do not forget sepal he twisted out of 3 slips and stalk (wire wrapped green paper)
17
Bud ready !!!
18
Joyful creativity you !!!

19

courtesy: homyachok-scrap-challenge

Sharing is caring!