It’s time to make it your home! No plans, drawings, ideas. But when the hands start to do, the head starts to help them.
showcase for kinder
In the workshop, there was some planed pine slats section 7 to 45 mm and 1300 mm in length. The residue from the previous work.
showcase for kinder
Be sure to have been decided to make a beautiful home for toys, an exemplary image which has been born in my head and climbed onto the paper pad.
showcase for kinder
Quick rough calculations showed that a number of available rails can be done two shelves for toys with dimensions of 352 x 292 mm and a mesh of 50 to 50 mm. More accurate calculations gave the following results:
workpiece length, mm                                          Amount
337                                                                                    4
292                                                                                    4
280                                                                                    4
223                                                                                     4
168                                                                                     6
52                                                                                        36
Thus, for the invented two shelves need to have available 7 meters 40 centimeters and 8 millimeters recheck. Yeah, it seems a bit much! But if we divide, we get a total of four two-meter reechki.
Pre reechki should be thoroughly sanded with sandpaper to a pleasant smoothness. For sawing of blanks I have used the mechanical method, more accurate and faster:
showcase for kinder
So, of course, faster, but still a chore – 58 blanks:
showcase for kinder
Well, then, even more interesting! I mean, it’s hard. Referring to the drawing in a notebook, in all the blanks, but the smallest, it is necessary to choose the depth of the grooves of 1 mm for the connection. How many are needed? Many, it is necessary to count. Also, mechanize the process:
showcase for kinder
Finally, you can try a few elements of the future shelves. To make sure I do it right:
showcase for kinder
Like everything about the case. Sewing on. And a few hours humming gave the result. Pre-assembly pleases:
showcase for kinder
To fix the parts I use glue “Moment-joiner” and a few clamps:
showcase for kinder
However, after the bonding shelf seemed too rustic. You can, of course, attach the back stenochku, suspensions and varnished. It will be too bad. But not at all!
A little more reechek and glass will make the door shelves. And it will be a showcase! Toys will be happy – no dust, no drafts. A pair of cutters and hand-mill help to make for refining shelves:
showcase for kinder
In the section of the fillet size very small, 7 to 7 and 7 to 15 mm,
showcase for kinder
The incorporation of “good note” glue “Moment-joiner” held quite tightly. The grooves will be inserted glass 4 mm in thickness:
showcase for kinder
Before final assembly of doors windows, I stuck to the glass newspaper paper tape. This prevents it from getting paint in the future.
showcase for kinder
On the side of the shelves, I also stuck galtelki:’
showcase for kinder
It turned out quite think of anything. It is not so simple-minded as planned at the beginning:
showcase for kinder
On the size of the shelves,
showcase for kinder
I had two back walls. Of refined white chipboard, size 352 x 292 mm.
showcase for kinder
A wall secured to the nails, through a pre-drilled hole:
showcase for kinder
Well, that’s only left to paint:
Acrylic paint from the spray lay wonderful texture of this tree is not blocked:
showcase for kinder
Loops and locks Finishing Touches:
showcase for kinder
It did not happen to make a quick and simple way as planned. But the end result is like not only to me, and toys.
showcase for kinder
Thank you for attention!
courtesy: livemaster
Shares