Making house-to attics mouse
as the base material has been selected PVC. The reasons: easier plywood, sturdy cardboard, well-cut and glued.
I want to do a house facade with a dull and glazed windows, in this case the interior I do not wonder. Therefore, the hole in the rear wall to during transportation to the lodge could put stuff and dolls, and the interiors are decorated in any way.
The design consists of two separate parts for easy transport. In the future it is planned to select materials such that the decor does not break and does not scratch during transport and that I did not have to carry a house as “a crystal vase.” I always think about the convenience and some sacrifices on the altar of beauty is not ready. Front view. Rear view. Before painting tests were performed on a piece of plastic; it became clear that even with a PVC acrylic otshkurennogo slazit if its scratching. So I decided to paste over house textured paper (toilet paper, you understand, but you can buy and corrugated, the only difference in Pontus). Tearing it into small pieces and pasting random texture to lay in different directions. The glue – joiner “Moment”: since then, as the man who introduced me to this glue on PVA, I look a little bit down. Joiner – is about the same, but it dries much faster. The texture close: Pasting The wall took me three nights and dreary painstaking work. All ends are stuck, too, is folded in. The roof is a simple office papered with paper strips that will save me a lot of time. Above is tile, so that the paper will not be visible. Now paint. Paints – Maimeri Acrilico in the box, they have excellent coverage, a good mix of colors, a little pasty consistency, and most importantly – the price “src =” http://static.diary.ru/picture/1135.gif “/> I like them work, and I bought a basic set of colors. The walls of the house are painted white acrylic roof – black. I already wrote that hard dioramschikov dig sites, and they provide the basis for all sorts of black texture, so I decided not to reinvent the wheel and do as said. The white color even in combination with the texture will be too flat, so I decided to add shades. makes perfect random))) The first color – pink-brick, acrylic thinned to the consistency of thick cream, a couple of strokes applied with a brush to the surface and quickly rubbing with a cotton pad (without missing a second, because acrylic dries instantly!) Dioramschiki overwritten oil, it dries longer, but also to buy the oil, I do not see any sense. As a result, we have painted the raised sections of texture. The second was chosen in the shade for the first couple, It spreads liquid-liquid greenish-brown in color and the surface is washed out. Surplus wiped with a cotton pad. Places around the frames, the roof and the ground soiled stronger. My house on Quenta standing in the woods, in swamps, so it is assumed that it is green with water, overgrown with moss and so on. It can be clearly seen both colors. Now, sticking wooden frames. I got to pull veneer, but in general they buy in stores for modelers. Lipov rail 5×5 I bought there. Clay – the same carpenter’s “Moment” glue perfectly. Reechki guy offered to cut with a laser, which would have saved me a lot of strength, but in this case than sloppy – the better Here we will have a balcony. Sticking is a frame and a wooden floor.
Balcony pokleit. It consists of a square planochek (linden) and toothpicks (bamboo). In planochki drilled pin hole of toothpicks, and all this was going on the carpenter’s glue.
veneer plastered floor balcony.
All the wooden parts are opened under the cherry stain. Stain alcohol, darkest, there was a (very specifically asked not smelly, they are on a different basis). Working with her I liked: it perfectly permeates the material and flows into the gap. Getting the tile. Pieces of cardboard 1h1,5 cm, rounded off to one side. I spent a lot of time on his hands cut this stuff to think about how much time it will take to all this acrylic painting, especially the ends of each tile. Horrified. I tried to paint stained cardboard – suddenly got an excellent imitation of pine bark. A random glue spots resemble the following resin Clay roof tiles in rows, each impregnated with the following stain. All pokleit. Also spent a lot of time – but not as much as it could)) The pipe is made of terracotta Mungyo Sculpt Dry, marked grooves wet. Somewhere awry somewhere just cracked – it’s to our advantage. Shingles is also glued unevenly. To brighten identify all these nuances, the roof and the pipe will still need to further paint. The doors are also made of veneer, glued to a cardboard base (dyed black, as well as the roof). I paid a further relief needle. Preparations under stones – lumps of toilet paper. Although I have real stones, but it will be lighter in weight.
I make shutters. Cut pieces of cardboard, under the plane shutter with black paint, the plane of the wall – white.
Cut the board veneer nanoshu relief needle. Shutters painted stain and then glued. to construct the frame. Pieces of transparent acrylic strip of paper glued over at its end to them reliably glued everything else. Then again, I cut veneer and glued. Reiki in small boxes made of matches on the balcony window had to take a thin round stick (ripped from bamboo napkins) and cut in half to get a flat surface. With the shutters and windows baggage long, just a frame with rails made day. The windows are glued to the house from the inside. Balcony. I paint the shingles. The principle is: The mixed terracotta color and paint each cherepichku separately in a chaotic manner – about a quarter of the total. White mixed in, to get a lighter shade – again paint a quarter of all tiles. Knead a darker color – paint the rest. Due to the fact that some tiles painted more densely, others thinner, and four colors, is so artistic mess. Some tiles dokrasila about the same mixing, but less brown and more white and black – released more gray. Also colored liquid diluted black tube – she immediately got bedraggled appearance. The opening of the chimney is painted black. painted the earth thicker, several shades of green. Also painted the stones. Dark tone – the foundation lighter top: gray, brown, green, light gray spots of lichen. Free pellets now do not know)) So, we have beautiful new tile. The lodge is in a wet area, so that the lichen will be done not only on the rocks, but also on the roof. I take an ordinary kitchen washcloth, breed light gray with a green tint and paint randomly poke washcloth in shingles. It turns well. Please pay attention to the lack of the pipe. I put it on the two pins of toothpicks in the roof – two holes. Roman and advised to leave her rented – for easy transport)) Tiling still too new and lichen stains would not hurt to mute. Interferes with gray-brown-green and poke a washcloth, even thicker than before. The roof – a bomb! Compare with a reference . The tube I touched up the same color as the tile. Now, shutters and frames as compared to the roof look too new. Damage and blocked. Wood from the sun and the water turns gray, so gray breed of paint and get dirty all the wooden elements of the protruding portion of deepening not touch. The same with balcony and with a door. Here you see the copper rails, hinges and handles. Made all using standard methods vayrvorka, reiki – strongly flattened wire. Copper is necessary to wear out, I’ll do it later, so long as the elements are hanging on parole.
I think Moss deserves a separate post.
Dioramschiki often find materials for his songs in the most unexpected places. It just so happens I have. He led me to this idea one video tutorial, which makes the tree with a crown of wood chips (this happens when potsiklevat floors, very small).
This is the kitchen sponge, which I inflicted on the roof texture. Green abrasive part consists of fibers that are perfectly simulated moss (as it turned out). I hoped that I had something to work, but did not expect such a good result.
it is better to take the green washcloth because acrylic paints are not everything. tear off this part pokromsat into small pieces with scissors. kneaded in a jar paint desired color – it’s the same acrylic Maimeri. He added to about a teaspoon of wood glue “Moment”. I poured all the pieces and mix well. Period of service with the batch until it started to set – up to half an hour for sure. There is no moderator in acrylic, his role is played by the adhesive. I had two such mixing. And interfered with, and share the fiber, and cleave – all two toothpicks, I’m very comfortable. The result: the roof. Live better, I’m the one still photographer. Keeps Moss very well due to the large number of high-quality adhesive with a plasticizer. You can grab your hands, etc.
boxes for flowers glued PVC as frame house, plastered and toilet paper. Top dyed acrylic: a continuous layer of brown paint, black paint and then “dry” brush. The result was such a colorful texture, and thanks to the topography of toilet paper at all like a tree))
Brass holders are inserted into the holes in the wall. Hold on tight and do not fall out on display, but for transportation will shoot. repaint the pipe under the color of the stone, not clay. On the roof glued pieces of Icelandic moss, pine needles, etc. Lantern: windows – thin acrylic film (it was a badge Exhibition), vertical bars – ordinary office paper, the bottom and cover – PVC. All collected on superglue, because otherwise acrylic unstuck. Inside a piece of toothpick in place candles. Everything Crash various acrylic: foundation – dark brown, gold accents and black colors. The flashlight is also held in the wall of the hole. At first I wanted to hang it on the right end of the house above the window, but because of the facade hardly be seen at the exposition, then I changed my mind. I still do not hurry patinated copper elements: a sudden something else I want to do? Getting swamp. A piece of acrylic 3 mm thick (which was) Roman cut me to the laser. It was possible to cut hands, but less risk to ruin a good piece of acrylic. Acrylic is laid under the cardboard. I only had green, so had to paint in black. The edges of swamps plastered with toilet paper to stick together the whole structure. Next, paint the edges: a dark brown-green tone as a basis, the lighter applied washcloth. Also washcloth zatampovana surface swamp, duckweed to simulate. The scope for such work a little bit crazy, the diameter of water lilies – 1 cm, it is about 1/6 format. Blue flowers – 4 mm in diameter. Even my fine motor skills is not always enough for the desired result, but I try. There’s something yellow – blank, midway into the following colors have not yet figured out what.
Nalepa lily pads. They got the second time: I wanted to make sure that you can just put the group leaves on the swamp, not sticking them firmly, it is necessary for ease of transportation. So, the bottom side should be flat. The first version of the leaves was thick enough, but it jarred (leaves, I do not throw away – can still be useful, there they are on the sides of a bog). Googling properties Deco: did write that warp when drying (((I had to come up with a workaround: What if the leaves to make thinner and glue on a piece of cardboard? Said – done. This is the limit vmeshivaniya paint, where the clay is not falling apart when modeling . There are different stages of the process can be seen on the left – a cardboard template under leaves, in the center – glued island inside out, right at the top – one on the front side, bottom right – Ready island leaves already pasted on cardboard. As you can see, it is quite flat. Dokrasila leaves a dull color, because they are very plain water lilies (and why I molded a different color, I do not know?), taped lily. Along the edges of swamps added moss, tinted in different colors it. And this is – Strawberries in boxes. Ranked she I have a lot of time, because the flowers are molded in stages. Successfully adapted eye of a needle, to form midway petals, and generally learned a lot)) The process is as follows: 1. sculpt flowers. knead the clay green paint, sculpt leaves. Details dry. 2 . Sliced wires are bent loop on one end – is under the buds and berries, the other – a circle, bent perpendicularly, for flowers, and some leave because of procrastination – is under the leaves. 3. Glued flowers and leaves on the wire, the buds on naleplyayu raw wire with a loop. Kneading the red paint. I form berries, eye poke a needle to give invoices, sit down on the wire. The adhesive dries. I am waiting for complete drying. Svezhenaleplennye parts too dry. 4. Comes off the buds and berries with procrastination, delays in Macao glue, I stick back. The adhesive dries. 5. Again I kneaded green clay. On the flowers, berries and buds form a parison under sepals. 6. While the dry sepals, already dried sheets of paper cut out with a knife-maketnikom cloves. I collect the blank leaves of three, twist the wire. 7. Gently tear off the sepals, cut cloves pasted back. 8. Crash leaves midway in the green, trying to make the gradient of the edges. I paint all the stems and acrylic legs, it perfectly lays down to the wire, and does not crack when bent. I paint nozzles berries in lime and yellow flowers in midway. In short, I was busy with all of this more than one day))) It’s time to put our strawberries! Glue the leaves on the bottom of the box. The boxes stuffed instead of land of the same moss and glue povtykat flowers, berries. All beautifully arranged and wait until the glue dries. Done!
Nalepa different leaves and flowers, stems, wires colored acrylic, glued leaves. The stems of reeds – the same wire, but unexpunged insulation (green), produced from the twisted pair. On top crash acrylic, then pasted stems of reeds. Reed leaves do so: on a flat surface sausage rolls, then Ivy on the handle of the brush – so we get a semi-circular cross-sectional shape, it bends as needed and put to dry. The bottom sheet is made more prominent, top – a flat. Preparations for the ivy leaves you see on the left, on the tubes of paint)) After drying, they are not flat and semicircular. From harvesting to get two leaves. The stalk Ivy was made of a very thin wire, after drying the leaves were cut blanks maketnikom. Here, three piles of different colors: the brightest leaves are at the ends of branches, darker – at the bottom. Under the house is planted with flowers of different varieties and species)) The leaves, too, kneaded clay of different colors, some even painted. done on the windows and balcony door curtains, because the interior is not the case – in short, that it is not very conspicuous)) Ivy on the building. The technology is still the same: acrylic paint branches, giving dry, glue on each sheet of PVA. For wall mounted small wire staples for them in a wall pierced with a needle hole. On the leaves, I walked a little brush to give heterogeneity. A little more than an outline. Rushes also decided to make individual elements for ease of transport. Grounds cut from PVC, plastered with toilet paper, painted, then stuffed the hole with an awl, wire stems are glued into them. To separate the leaves and glue individual wire pins. Inserted in the minimum. The bottom of the “island” is decorated with grass reeds of sponges, as well as the shore of the lake. It’s almost all)) is necessary to complete just some little things to add to the location of household objects to give the impression of a small house living.
Stools. Made of veneer and reechek square (the same from which made the balcony railing in Part 2), Stain on top, followed by sanding. I tried to paint them with acrylic, but it did not happen.
The two gray byaki – a pumpkin stock for: toilet paper, thread, glue. Made in order to save material, although they can be completely fashion from Deco. The pumpkins are ready. I’m a little hollow tinted brown paint for a living species. benches of the same material as the balcony: there were still a lot of square slats, it was a pity)) Thin cross – from the dissolved bamboo mat. Mushrooms! She did a few evenings: Nalepa pile, looked like around the bush – not enough, to stick again, and so a few times))) packaging for mushrooms is also made of bamboo mats: there were two types of strips. Hoops paper, collected on glue. Bottom triple-board-rack rails, sits in a barrel on glue. bowl of Deco. On the balcony under the roof they also have mushrooms. Bed linen rug, blinded another jug of Deco mug beads bought in the store “Monpase.” Yes, I know that the exhibition in the spring, and we have here and the mushrooms, and pumpkin – mouse but I firmly associated with domesticity and thrifty, so the subject of the crop has been disclosed. The compositions are still a wheelbarrow and a bag of sugar from the same photo shoot – what good to disappear))
Well that’s all the work is finished.