Peacock from bead work
Getting started with the beak
recruit 2 piece of wire (by 2.5m each) 1 red bead further the ends of a wire is left free, and the second begins to weave a parallel manner under the scheme 2-3-4-5 reserve transition to a free piece of wire and start typing for the the scheme 2-3-4-5 but after each row intertwined with the finished half of the beak. In this way, we get a look below the beak
continue to take the ends of the wire to do the right twist (1 cm) and begin to weave the French manner (eye) on the scheme in the central 1 bis. (beads) blue col. (color) bead (5 mm), and again bis.golubogo 1 col. the free end of the wire beads recruit black tsv.po arc do twist (1 turn (vol.)) and continues to gain bis.chernogo col., in an arc, making twisting 1 ob.nabiraem 4 bis. White col. 4 blue col. and the rest to complete the arc of white col. 1 of twisting. continue to weave backwards arc, twisting 1 vol., subject to move in the left eye repeat weave but in mirror image.
On one end of the right side of the black dial 1 bis. 6 blue and black 1 through 8 bis. 3 threaded piece of wire size 70 sm.i parallel with the left side end of the wire is passed through an encore.
And so we have on the upper side of the head turns 4 end small ends of the reserve is free as long weave as follows: 1 black, 6 blue 1 black, but black remain free after 6 blue is passed to the left parallel to the end, each side of the free black bis. free small threaded ends in each row is added 1 blue encore. you should turn on the photo 2
further weave to 3/4 of the total eyes you will understand that took to the neck leaving the upper part of the free and begin to weave the lower part of the head is just touches the top of here begins a difficult time of forming the neck (this is my advice for each row in the middle of flashing not a large piece of wire to each other and then the work will look neat and correctly will be formed neck peacock but weaving neck in each row is added 2 bis., in the folds of the upper neck weave 5 series of more than a lower part 5 less and turn the fold of the neck where it will be seen the head and neck, see photo 3
further postpone the head with the neck to one side and begin to weave the right wing of the French way in the middle of the blue 10 bis. the free end of a dark blue beads along the arc twisting 1 vol., dark blue beads arc twisted (weave as the eye) but the arcs on the wing should be 10 (11 total in place with central), each number is in the order emerald green, orange dark pink diamond and the last follows the first arc of a dark blue twist 1 on. but the second follows 5 is inserted through the pink so that would be formed a semi-circle or wave 5 and then again through the pink and so on to the left wing twist woven and twisted just to be on the other side, see photo 4
take my head and start from the beginning of the body drag wings as follows: 5 bis. the wing at the bottom of one end of the wire is threaded -nabiraem 7 bis. blue and now mirroring 5 bis. the second wing begins to weave the upper torso in a row is added 2 bis. reaching the middle of the wing weave 5 rows of the same number of beads in the series (40-46), depending on the caliber of beads, then begin to diminish in each row 2 bis. and so on until you get to the 20 bis. in the row. begin to weave the lower part of the body but in the middle of the body attach the wire size (0.15 mm.) length of 9 cm. folded in the middle (this is for the legs), see photo 5 and 6
legs weave weaving following the Japanese way of wire (length 20 cm.) recruit 1 dark blue encore. 4 yellow and yellow is passed through the second end of the wire so that the needle would get a central toe on the right end of the wire 4 recruit yellow and dark blue 1 bis. and the end of the wire is passed through yellow 4 left do the same but the toes should be tightly Scourge further on both ends of the wire recruit 7 bis. yellow is now necessary through these 7 bis.prodet wire that is attached to the body so that the ends of the wire peeking from the bottom of the feet at 1-1.5 cm longer than the stable will look out your peacock, weave the second leg and is also attached to the wire. our peacock is almost ready to install it on a stump where a pre-made holes for mounting tabs peacock
Puts it aside and begin to weave the most beautiful part of the peacock’s tail: doing twisting central row have a blue 1 bis., 1 blue bead, 1 blue encore. arc on the wings (11 with the central series) after the last twist attach wire-frame (size 0.15 mm length -20 cm.) to the pen stood and did not fall on him, and put on beads pen length 13 cm. wire weaving pen must be 2 sizes Center 7 cm., and arcs 5m.sm photos 7 and 8
Then begins to weave a needle or the Japanese way, see photos and description of 8 feet but between each igolochkoj 1 Free bis.cherez -Frames wire which passes in each row of needles diminish 1 bis.i weave until the pen is not the size of 13 cm. Bend the wire – frame start at the base makes the second feather feathers should be from 5 to 7 pieces, depending on your desires.
And now the most important assembly take two pen and twisting so that they are slightly separated from each other and began to create an arc, fasten the feathers at a time by alternating the direction of mounting the pen until a fan-shaped tail and the most important fixture of the tail within our peacock to the lower torso fasten its wire to each row of the body so tightly that our tail did not fall and not cool. and the final touch that was not visible space is not a big bar doing very little feathers in the Japanese style on a wire length of 15 cm. 10 bis recruit. emerald color and curl 1 on. 2 recruit a number of dark blue so that he was little more than the first row and tightly twist the way to do 10-15 feathers but the 2-color emerald and pink colors of the attach them to the top tulovischa.smotrite 9 photos
our peacock ready
Courtesy: liveinternet.ru