Pet bottle handbag

Container need two five-liter plastic bottles cut in such a obrazom.Ochen important that cap was cut as low as possible to the bottom, there is very thick plastic and elastic (otherwise when opening plastic zipper will wrinkle)

So is reserved by threads…….. I do not have the punch to make holes then use a soldering iron (sting slightly sharpen)

At the edge of the main body and the lid of the container at a distance of 7 mm from the edge and from each other done a soldering iron holes (try to do it quickly, with prolonged contact with the hot plastic deformation) .Delaem handle, combine and make holes in the lid.

Undergirding the preform.

Sew a double seam.

the first stitch on the edge of paving the knitting, the second hole.

Sew the handle (it is necessary for the convenience of opening and carrying)

Behind to hide the seam sew zipper tie plastic strip (1 cm width to length with holes in the middle)

And here’s the result

To prepare the cosmetic pattern (I painted on the eyes) Probably you can use templates and boxes of cards.

For all parts except for cosmetic plastic sidewalls pile concave parts to each other.

Further, under a layer of plastic box and presses the pattern line.Mozhno and use of thick cardboard template overlaid on top raboty….. making holes along the edges of nodules formed plastic that I cut with a knife holding it at a slight angle.