Round tray of pine needles
Manufacturing round trays, drums and other utensils of this form begins with a woven round bottom. To do this, take a bunch of needles thickness of about 1 cm. And start winding a rope (about 5 cm.). Then, turning straw, resulting thick twine tightly roll up “snail”.
Thread the needle in and start weaving. Seam, which I applied in my tray is as follows: first the needle is passed into the bottom row of the beam 1.3 needles at a distance of 0.5-1 cm. From the previous stitch, tighten thread. Then you have to thread the needle in the same place as the first time.
When the bottom is ready, it is necessary to make a smooth transition to the walls, it costs a little weaving lift upwards. The handles are made in the continuation of the beam needles, by winding it working yarn, with the resulting twine, it is necessary, not When sewing, elevated above the bottom row. Next, continue normal stitches.
I completed the weaving, the information on the “no” working beam beam needles. The upper edge of additional stitches I do not complementary, since decided that it is unnecessary, but if you work with short needles, the additional number of stitches will be out of place.
As decoration I used spruce small bumps, I consolidated them with glue. The product turned out quite strong, so the additional processing (lacquer and so. D.) I did not use.