Time and skills, and make it can be made of fabric remnants, surely you have different scraps, which can be put to use. And our detailed master class will help you with this.
This cover can also be used for storage of flash player or a miniature, here it is already possible to show your imagination. Cheholchik can be used as a pendant, it was convenient to use it, and he was always there.
Let’s get started …
 case for the headphone
That’s what we need:
lightning;
main fabric;
Lining cloth;
Nonwoven for sealing or batting;
pattern, scissors, thread and a good mood.
 case for the headphone
From the base fabric (in this case, and colored dots) cut parts 1 – piece 1, 2 – 2 pcs., 3 -. 1 pc. (Pictured Circuits numbered).
Lining (in our case striped) and nonwoven 1 -1 units 2 – 2 pieces.
Swing 1 about 9-11 cm 3 -. 4-5 cm Details are given with allowances. The size of parts may be changed depending on the purpose for which will be hereinafter used.
 case for the headphone
As a result, we have obtained a number of parts:
 case for the headphone
Sleek interlining to the three parts of the base fabric:
 case for the headphone
Take a semicircle lining fabric face up and put on his zipper, so that the upper edge coincided:
 case for the headphone
Set top semicircle of the base fabric (also raze edges)
 case for the headphone
Now the “structure” should flash, departing from lightning about 5 mm (for convenience staple items or stoned)
 case for the headphone
 case for the headphone
So we turned one-half of the top of the cover. Similar actions are performed in the second half. Here’s what you should have:
The right side of the box:
 case for the headphone
Wrong side of the box:
 case for the headphone
Take preform face up and sew the two sides of the zipper, departing from it 2-3mm. Unzip to the middle and hand stitched back and forth for fixing:
 case for the headphone
We make a loop at the edge of the lightning. Take part 3, fold the edges to the center and then in half:
 case for the headphone
 case for the headphone
Sew part of the long edge on both sides, stepping back 2-3mm.
Next, bend your future loop in half and sew to the place where previously secured the zipper:
 case for the headphone
Take parts cut for the back side (of the base fabric (dots) and the lining (striped)). Circle, a cut out of the fabric put face down on top of the face we put a circle of lining fabric:
 case for the headphone
Now all this will place on the front part of the cover (lightning necessarily rastegnut until mid) and stitch around the circle, stepping back 5 mm from the edge:
 case for the headphone
Carefully cut off the tails of unnecessary padlock and trim allowance circle (leaving about 2-3 mm)
 case for the headphone
It turns out, stitch along the edge of a round cover, retreating 4-5 mm.
 case for the headphone
To our was always with us, we attach to the eyelet in the ring!
 case for the headphone
courtesy: livemaster
Shares