For a long time, I did not do MK – corrected.
For skirts cut out a rectangle, because the fabric I have enough, I do the whole panel length of 1.4 m and a width of 26cm.
Skirt with imitation will smell as if whipped one edge to the other. To do this by hand on fabric paint smooth rounding line as shown in the photo.
All edges except for the upper cut-off which will belt sizing nonwoven strips. You can take a ready nite Roshi Noy or like me, cut yourself a width of 5-7mm. This is necessary in order to edge thin tissues in the process of sewing is not deformed.
Cooking crawfish. Cut a strip width of 4-5cm across equity. For this, I needed skirts strip length 3,8m. I treated one edge of the strip roller seam.
The second edge collect using overlock making differential and stitch width to the maximum. I walked through the slice 2 times to build was leaves. frill length of the shelf turned 1.8m.
Kyushu tack cloth to the skirt.
On one edge of the assembly to sew the length of 5-7 cm and tack the open cut, closing the fabric into the ring.
Seam ironing and otstrachivaem departing from 3-4 mm edge
Make the assembly by upper edge skirts. Tried overlock, but then it is very difficult to uniformly distribute the folds, this do it manually, simply nametyvaya small stitches. If you do them in color fabric or thread overlock, basting it is absolutely not visible and it will not need to clean up.
The cut to length collect 60-65sm (hip girth plus 5-7cm freedom of dressing)
Cut out a belt of riba, grind band in the ring.
Eraser take long waist circumference minus 5-7cm.
The upper section of the skirt and belt divide into 4 parts, combine tags and pritachivaem on overlock, strongly stretching ribanu.