Translation images of plastic

1

For this we need:

White plastic, a roller for rolling, formic alcohol (alcohol or other liquid), cotton, a blade, the image will be translated. IMPORTANT: The image to be printed on a laser printer. I

2

Roll out the white plastic of the desired thickness. Putting a face image to the plastic.

3

Packer.

4

Wool moistened with alcohol (alcohol not regret, so that with it almost flew down).

5

Wetting picture alcohol. Fleece while as if slightly pressed into the picture, try to make it soaked in alcohol.

6

Packer soaked picture. Then repeat the procedure again alcohol dampening image.

7

Smooth picture blade with light pressure.

8

Now you can just wait until the paper is dry. Can withstand a couple of hours. But I prefer to leave for the night. Firstly, it is convenient (soaked night – in the morning you are ready), second paint is translated in 8 hours is ideal.

Next: needle carefully to hook edge of the picture, and remove it from the plastic.

9

Cut out the form we obtain the result.

10

11

1

 

Shares