Weaving baskets from twine for small presents
And so, for we need:
Thermo-gun; Clay Titanium, PVA glue,
Flower pot (I have a small pot, seedling), choose a pot on the desired size of the future baskets!
We take our pot at the top (neck) make the markup, I got through 1 centimeter. The notch on the pot I made a mark for clarity, I do without her, is enough for me to put a marker dots in the right places. And the start of our vertical winding pot string ….
Pots and so were many other colors, but the meaning is still the same … And so, we continue to wrap twine to the twine does not roll I drip a drop of hot glue on the top a side pot and secured twine (clearly visible in the pictures taped twine) For Adhesive Do not worry, in the end it will be easy to pull out !!
Aligns the twine vertically potty !! And that’s what has to happen !!
The lower rim of the pot I’m not hot glue sizing since then it will be hard to get a pot of baskets. For the bottom of the file,
And so the circle is ready, the bottom of the pot a good glue sizing Titanium and glue the circle of twine in the circle leave the thread length with the meter (for weaving) !!
Meter segment of the circle passed through his fingers liberally smeared with glue to a twine is not shaggy and had stiffness .. and begin to weave, how could anyone, I spun like this picture !!
Can be used for weaving hook, so I spun: the calloused tip of the glue twine I threaded the needle between both vertical ropes, however, making the stitches. To speed weaving as well as in sewing, do several stitches and then stretch the rest of twine .. (as in the photo) When the segment result, cut the new meter for the whole stretch or cut the hands and stick together the two ends together, as the new grease-lubricated cut adhesive, continue (to sew)
With the top cut out midway!
Remove the adhesive and begin to bend them sticking to each other on the hot glue! We take out the pot without fanaticism))
Cut off sticking strings of glue braid as it is not closing all beauty)). Pigtail hook I knit for me so quickly
It looks like the inside bottom of a, I do not close it with string, as I have a basket close colors!
Coat with a basket with white glue diluted with a little water, we coat the inside..
Now it handles)) pen, I took two pieces of wire bent and wrapped them like this:
Wrap up halves. Clay handles on the hot glue to the basket after the drying of the PVA.
Now that’s sticking a zig-zag to the end of a winding handle …
Further, with the zig-Zag move the coil, only this time the handle is wound together …
When the handle is wrapped up the opposite side, zig-zag finish …. thread in the basket!
From the twine do the bow, sticking it on the handle.
And so I turned basket
I did the double braids for volume
For the stability of the baskets, I glued another braid to the bottom a side! And now she’s ready mini beauty !!