As the first time I wanted to try making a lot easier vase of those seen, but with the same processing technique. This is the result.
To do this I used a vessel that I served as a support to form the decorations that I created with rope.
The vessel I lined with plastic wrap so as not to paste the string on it.
I did the drawing of a flower and put it in the jar so you can be of help in doing so.
The flowers have made them only on two sides of the vessel,
The other decorations I did not follow any pattern! At the top and bottom, I did about ten laps to finish and rope.Alla end I spent plenty of glue on each decoration and made it dry.
Now comes the part a little more unpleasant, to remove the pot rope from a glass jar. I tried before detaching the film from the vessel in the middle of inserting a very thin stick turning all
around, then slowly pulling gently together with the film and the rope vessel. I removed the foil pieces that had been attached to the rope cutting them with scissors.
To make the bottom of the pot
I took the initiative with a card and I started to cover it with rope.
I spent more glue and I have done well to dry.
I then glued the vase on the now dry bed.
Now the pot can keep it that way or you can the pot you used as a support, freed from the film you will see the transparency of glass.
